JVC XM-448BK manual Playback, Continuous playback

Page 10

Number of tracks Total playing time

Playback

OR

You can also use the button on the inside panel of the remote control.

OR

OR

Continuous playback

The basic operation for playing an MD is described below. When no MD is loaded yet, “NO DISC” is shown on the display.

1 Load an MD.

Hold an MD with the side on which an arrow is marked facing up, and insert it into the slot in the direction of the arrow.

The MD will be pulled in automatically from the middle.

• If the MD has a disc title, the display shows the disc title then the number of tracks and total playing time of the MD.

• The tracks in the MD appear on the music calendar.

Note: To allow easy insertion, insert the MD along the upper part of the MD insertion slot.

Caution

•Do not fail to observe the MD insertion direction, otherwise a malfunction will result.

Shortcut:

You can insert an MD in Standby mode. Then, the power is turned on and the MD is pulled in automatically.

2Press 6 on the main unit or 3 on the remote control unit.

Playback starts.

The 3indicator blinks for a while and then stays lit.

The playback levels for the L and R channels are shown on the level indicators.

•If the track has a title, the track title will be displayed before playing the track.

•The track number that has been played disappears from the music calendar.

•The MD automatically stops when the last track of the MD has finished playing.

Shortcut:

When you press 6on the main unit or 3on the remote control unit in Standby mode, the power is turned on and the MD is automatically played. However, if no MD is loaded, “NO DISC” is shown on the display.

To stop the MD:

Press 7 on the main unit or on the remote control unit.

•If the MD has a disc title, the display shows the disc title then the number of tracks and total playing time of the MD.

To eject the MD:

Press 0 on the main unit or on the remote control unit.

The MD is ejected and the display changes as follows:

8

Image 10

Contents XM-448BK For U.S.A Important cautions WelcomeFor safe use, observe the following Table of Contents Front panel STOP/CANCEL buttonParts Index DisplayInside panel Remote control unitPower button Buttons on the Inside Panel Play Mode buttons Display buttonsRemote control batteries Setting up the SystemSupplied accessories Operating the remote control unitExample Amplifier/Tuner Signal cable connectionsConnection Audio pin cordsPower Off Turning the Power On and OffPower On AC power cord connectionPlayback Continuous playbackTo select a track Using headphonesSearch play Program playback Using the display modeTo switch the display information To change the brightness of the displaySelect Program Play mode. Main unit Remote control unitSelect desired track numbers to be programmed. Main unit Random playback Repeat playback To cancel Random Play mode In Stop mode Main unitTo cancel repeat playback To repeat random playbackRecording operation RecordingThings to know before recording Play the source to be recorded To stop recordingTo display the remaining recording time To adjust the analog input levelTrack marking Editing Functions MD editing functionsCombining editing functions When using the remote control unitAssigning titles Dividing a track Divide Press SET on the main unit or on the remote control unitPlay a track to be divided Joining tracks Join Select a track to be joined with the previous track Press Enter on the main unit or on the remote control unitDecrements by Moving a track Move Select a track number to be moved, then press SETTo select Erase Press Edit on the main unit or on the remote control unitErasing a track Erase Blinks Blinks BlinksPress 0 on the main unit or on the cover panel the remote Select a track number to be erased, then press SETControl unit to eject the MD Erasing all tracks in an MD ALL Erase Load a recorded MD Press Title To assign a title using the buttons on the main unitAssigning the disc title and track titles Press SETPress 0 to eject the MD Available symbolsPress Enter To make a correction or change the titleInput the disc or track title To assign a track title during playback or recording Input the track title nameLinked Operation of the Other Optional Components Compu Text Compu Link Connection with receiver or amplifierConnection to CD player or CD changer CD playerScms Serial Copy Management System Rule on Digital Copying1st generation 2nd generation Two disc types About MD Mini DiscRole of the cartridge Playback-only MDAtrac Adaptive TRansform Acoustic Coding Utoc User Table Of ContentsSound skip guard memory MD handling precautions Handling MDsMD Messages Messages Description TreatmentSymptom Cause MD RestrictionsTroubleshooting Symptom Cause TreatmentHOW to Locate Your JVC Service Center Limited Warranty AUDIO-1 Specifications Digital