JVC XM-448BK Select a track number to be erased, then press SET, Control unit to eject the MD

Page 26

3Select a track number to be erased, then press SET.

Select a track number by turning the jog dial on the main unit or by pressing < / 4 or

¢/ > on the remote control unit.

Then press SET on the main unit or on the remote control unit.

 

Blinks

Blinks Blinks

OR

 

1

2

3

4

5

 

6

 

 

 

 

 

 

 

 

 

 

SET

Example) When track No. 2 is to be erased

 

Blinks

Blinks

 

 

 

1

2

3

4

5

 

 

6

 

 

 

 

Example) When SET is pressed

•You can also use the numeric keys on the cover panel of the remote control unit to select a track number, then press SET. To select a track, see “Selecting a track with the numeric keys” on page 9.

•If you selected a wrong track number, press 7STOP/CANCEL on the main unit or CANCEL on the remote control unit and select the correct track number.

•If the display shows “TRACK PROTECTED”, the selected track has been protected against accidental erasure by another component. You cannot edit such a protected track. To cancel the editing, press EDIT on the main unit or on the remote control unit.

OR

ENTER

4Press ENTER on the main unit or on the remote control unit.

The change made above is entered temporarily in memory. The display shows “EDITING” and the TOC indicator lights up.

1 2 3 4 5

 

 

Decrements by 1

 

 

Press 0 on the main unit or on the cover panel the remote

 

5

OR

 

control unit to eject the MD.

 

 

The data in memory is written in the MD before it is ejected.

The display shows “UTOCwriting” during MD writing operation.

•Be careful not to apply impact to the MD recorder during writing temporarily stored data into the MD. Otherwise the recording may not be able to play later.

•The data in memory is written in the MD also when the power is turned off while “EDITING” is being displayed.

To cancel editing:

Press EDIT repeatedly on the main unit or the remote control unit before pressing ENTER in step 4.

Caution

•Once erased, the track can never be restored. An MD containing recording that you do not want to erase should be protected by sliding the protect tab (see page 14).

24

Page 25 Page 27
Image 26
Page 25 Page 27
Contents XM-448BK For U.S.A For safe use, observe the following WelcomeImportant cautions Table of Contents Front panel STOP/CANCEL buttonParts Index DisplayInside panel Remote control unitPower button Buttons on the Inside Panel Play Mode buttons Display buttonsRemote control batteries Setting up the SystemSupplied accessories Operating the remote control unitExample Amplifier/Tuner Signal cable connectionsConnection Audio pin cordsPower Off Turning the Power On and OffPower On AC power cord connectionPlayback Continuous playbackSearch play Using headphonesTo select a track Program playback Using the display modeTo switch the display information To change the brightness of the displaySelect desired track numbers to be programmed. Main unit Remote control unitSelect Program Play mode. Main unit Random playback Repeat playback To cancel Random Play mode In Stop mode Main unitTo cancel repeat playback To repeat random playbackThings to know before recording RecordingRecording operation Play the source to be recorded To stop recordingTrack marking To adjust the analog input levelTo display the remaining recording time Editing Functions MD editing functionsAssigning titles When using the remote control unitCombining editing functions Play a track to be divided Press SET on the main unit or on the remote control unitDividing a track Divide Joining tracks Join Decrements by Press Enter on the main unit or on the remote control unitSelect a track to be joined with the previous track Moving a track Move Select a track number to be moved, then press SETTo select Erase Press Edit on the main unit or on the remote control unitErasing a track Erase Blinks Blinks BlinksControl unit to eject the MD Select a track number to be erased, then press SETPress 0 on the main unit or on the cover panel the remote Erasing all tracks in an MD ALL Erase Load a recorded MD Press Title To assign a title using the buttons on the main unitAssigning the disc title and track titles Press SETPress 0 to eject the MD Available symbolsPress Enter To make a correction or change the titleInput the disc or track title To assign a track title during playback or recording Input the track title nameLinked Operation of the Other Optional Components Compu Text Compu Link Connection with receiver or amplifierConnection to CD player or CD changer CD player1st generation 2nd generation Rule on Digital CopyingScms Serial Copy Management System Two disc types About MD Mini DiscRole of the cartridge Playback-only MDSound skip guard memory Utoc User Table Of ContentsAtrac Adaptive TRansform Acoustic Coding MD handling precautions Handling MDsMD Messages Messages Description TreatmentSymptom Cause MD RestrictionsTroubleshooting Symptom Cause TreatmentHOW to Locate Your JVC Service Center Limited Warranty AUDIO-1 Specifications Digital
Top Page Image Contents