JVC XM-448BK Erasing a track Erase, Press Edit on the main unit or on the remote control unit

5Press ENTER on the main unit or on the remote control unit.

OR ENTER The change made above is entered temporarily in memory. The display shows

“EDITING” and the TOC indicator lights up.

1 2 3 4 5

6

OR

EDIT

6Press 0 on the main unit or on the cover panel of the remote control unit to eject the MD.

The data in memory is written in the MD before it is ejected. The display shows “UTOCwriting” during MD writing operation.

•Be careful not to apply impact to the MD recorder during writing temporarily stored data into the MD. Otherwise the recording may not be able to play later.

•The data in memory is written in the MD also when the power is turned off while “EDITING” is being displayed.

To cancel editing:

Press EDIT repeatedly on the main unit or on the remote control unit before pressing ENTER in step 5.

Erasing a track (ERASE)

A track can be erased from the MD. The track numbers after the erased track are renumbered automatically.

1 Press EDIT on the main unit or on the remote control unit

to select “ERASE”.

OR

OR

SET

The ERASE indicator lights up.

Each press of the button switches the editing functions as follows.

DIVIDE JOIN MOVE ERASE ALL ERASE

Canceled

(MD total playing time display or Disc title)

Blinks

1 2 3 4 5

6

2Press SET on the main unit or on the remote control unit.

The current track number will blink on the display.

Blinks Blinks Blinks

1 2 3 4 5

6

23