JVC XM-448BK manual Connection to CD player or CD changer

Page 34

Connection to CD player or CD changer

Without connecting the receiver (or amplifier) equipped with the TEXT COMPU LINK remote control system, this connection enables you to record the track title information of the CD Text onto an MD in its original form, when recording from the CD player.

To use this control system, connect the units as follows:

1.If the CD player (or CD changer) and this unit have already been plugged into the AC outlets, disconnect their AC power cords.

2.Connect the CD player (or CD changer) and this unit as described below using the COMPU LINK-3 (SYNCHRO) and TEXT COMPU LINK jacks.

1COMPU LINK-3 (SYNCHRO) jacks: Use the supplied Compu Link cable (with

the monaural mini-plugs: black).

CD player

COMPU LINK- 3

(SYNCHRO)

2TEXT COMPU LINK jacks: Use the supplied Text Compu Link cable (with the

stereo mini-plugs: green.

CD player

TEXT COMPU LINK

1 (MASTER UNIT)

2 (SLAVE UNIT)

IMPORTANT: Without setting the

MASTER/SLAVE selector correctly, the

TEXT COMPU LINK remote control system does not work.

Set the MASTER/SLAVE

selector on the rear panel

to “1 (MASTER UNIT).”

3.Connect the CD player and this unit using the audio pin cord (and a digital cable if any) (see page 6).

4.Connect the AC power cord of the CD player to the AC outlets.

5.Finally connect the AC power cord of this unit.

32

Image 34

Contents XM-448BK For U.S.A Important cautions WelcomeFor safe use, observe the following Table of Contents Front panel STOP/CANCEL buttonParts Index DisplayInside panel Remote control unitPower button Buttons on the Inside Panel Play Mode buttons Display buttonsRemote control batteries Setting up the SystemSupplied accessories Operating the remote control unitExample Amplifier/Tuner Signal cable connectionsConnection Audio pin cordsPower Off Turning the Power On and OffPower On AC power cord connectionPlayback Continuous playbackTo select a track Using headphonesSearch play Program playback Using the display modeTo switch the display information To change the brightness of the displaySelect Program Play mode. Main unit Remote control unitSelect desired track numbers to be programmed. Main unit Random playback Repeat playback To cancel Random Play mode In Stop mode Main unitTo cancel repeat playback To repeat random playbackRecording operation RecordingThings to know before recording Play the source to be recorded To stop recordingTo display the remaining recording time To adjust the analog input levelTrack marking Editing Functions MD editing functionsCombining editing functions When using the remote control unitAssigning titles Dividing a track Divide Press SET on the main unit or on the remote control unitPlay a track to be divided Joining tracks Join Select a track to be joined with the previous track Press Enter on the main unit or on the remote control unitDecrements by Moving a track Move Select a track number to be moved, then press SETTo select Erase Press Edit on the main unit or on the remote control unitErasing a track Erase Blinks Blinks BlinksPress 0 on the main unit or on the cover panel the remote Select a track number to be erased, then press SETControl unit to eject the MD Erasing all tracks in an MD ALL Erase Load a recorded MD Press Title To assign a title using the buttons on the main unitAssigning the disc title and track titles Press SETPress 0 to eject the MD Available symbolsPress Enter To make a correction or change the titleInput the disc or track title To assign a track title during playback or recording Input the track title nameLinked Operation of the Other Optional Components Compu Text Compu Link Connection with receiver or amplifierConnection to CD player or CD changer CD playerScms Serial Copy Management System Rule on Digital Copying1st generation 2nd generation Two disc types About MD Mini DiscRole of the cartridge Playback-only MDAtrac Adaptive TRansform Acoustic Coding Utoc User Table Of ContentsSound skip guard memory MD handling precautions Handling MDsMD Messages Messages Description TreatmentSymptom Cause MD RestrictionsTroubleshooting Symptom Cause TreatmentHOW to Locate Your JVC Service Center Limited Warranty AUDIO-1 Specifications Digital