Weider 8920 Attaching and Removing the Seat, Attaching the LEG Lever to the LOW Pulley Station

Page 16

ATTACHING AND REMOVING THE SEAT

Set the bracket on the Seat Frame (36) onto the pin on the Front Upright (42). Attach the Seat Frame to the Front Upright with the M8 x 67mm Carriage Bolt (14) and the Seat Knob (40).

For some exercises, the Seat (13) must be removed. First, be sure that the chain is not attached to the leg lever. Next, remove the Seat Knob (40) and the M8 x 67mm Carriage Bolt (14) from the Seat Frame (36).

Lift the Seat Frame off the Front Upright (42).

ATTACHING THE LEG LEVER TO THE LOW PULLEY STATION

To use the Leg Lever (29), the seat must be attached to the front upright (see ATTACHING AND REMOV- ING THE SEAT above).

Attach one end of the Chain (52) to the M10 x 63mm Eyebolt (35) with a Cable Clip (53). Attach the other end of the Chain to the Short Cable (23) with a Cable Clip. Note: Be sure the Eyebolt is positioned verti- cally on the Leg Lever.

	40
42	36	13
42		13
14
Pin
	52	29
	52
	53
23		35
		35

16

Image 16

Contents Model No Serial No SEARS, Roebuck and CO. Hoffman ESTATES, ILTable of Contents Important Precautions Before YOU Begin Using the Weider 8920 weight system. If you haveFor your benefit, read this manual carefully before Assembly Make Things Easier for YourselfTighten the Nylon Locknuts used in steps Each Carriage Bolt. Do not tighten the Nylon Locknuts yetPress Frame must be able to pivot easily Arm. Arm identification is important for step FrameCable Assembly Page Locate the Short Cable 23. Route the Short Inset shows view From other sideSeat Assembly Tighten the Nylon Locknut the Leg Lever Must pivot freelyPage Adding Weights to the Weight Carriage AdjustmentAttaching the LAT BAR or Nylon Strap to a Pulley Station Attaching and Removing the Seat Attaching the LEG Lever to the LOW Pulley StationWeight Resistance Chart Weight Press ARM Butterfly ARM LOW Pulley High PulleyLbs LEG LeverTROUBLE-SHOOTING and Maintenance Tightening the CablesCable Diagram Long CableTOP View Short CableExercise Guidelines Cooling Down Muscle ChartStaying Motivated Part Identification CHART-Model No .159711 R0102A Page Pulley 90mm Pulley Not shown to scale Part LIST-Model No Qty DescriptionExploded DRAWING-Model No Full 90 DAY Warranty Model NoSEARS, Roebuck and CO., Hoffman ESTATES, IL SEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL