Weider WEBE15100 manual

Page 7

3.Attach the Front Leg (8) to the Frame (2) with two M10 x 65mm Bolts (18), two M10 Washers (24), and two M10 Nylon Locknuts (19).

4.Tap three 45mm Square Inner Caps (21) into the Leg Lever (4).

Tap a 1Ó Round Inner Cap (23) into the indicated end of the Weight Tube (52).

Insert the Weight Tube (52) into the indicated hole in the Leg Lever (4). Press a 1Ó Angle Cap (50) onto the indicated end of the Weight Tube.

5.Lubricate an M10 x 72mm Bolt (53). Attach the Leg Lever (4) to the Front Leg (8) with the Bolt and an M10 Nylon Locknut (19). Do not overtight- en the Nylon Locknut. The Leg Lever must be able to pivot freely.

Attach the Narrow Spacer (30) to the Leg Lever

(4) with the M8 x 58mm Bolt (49), two M8 Washers (48), and an M8 Nylon Locknut (13).

Note: The Spacer will fit tightly inside the Leg Lever.

6.Attach the Frame (2) to the Lat Tower Base (35) with two M10 x 67mm Bolts (14), two M10 Washers (24), and two M10 Nylon Locknuts (19).

3

19

 

24

2

 

18

19

 

8

4

21

 

21

4

 

 

52

 

50

23

21

5

19

 

 

8

4

 

49

 

48

53ÐLubricate

30

 

 

48

 

13

6

 

 

35

 

14

 

19

 

24

2

 

7

Image 7
Contents Customer HOT Line Model No. WEBE15100 Serial NoTable of Contents Important Precautions Before You Begin Part Identification Chart Following Tools not Included are Required for Assembly AssemblyPage Backrest must be able to pivot freely Tubes and Backrest must be oriented exactly As shownPage Lip Removing the PAD Tube and Pads Using the Weight BenchAdjusting the Backrest Attaching Weights to the LEG LeverAdjusting the Uprights Attaching Weights to the LAT TowerAttaching the Curl Post Exercise Guidelines Cooling Down Muscle ChartStaying Motivated Thursday Aerobic Exercise Date Exercise Weight Sets RepsDate Aerobic ExerciseMonday Page Qty Description Part ListÑModel No. WEBE15100Exploded DrawingÑModel No. WEBE15100 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT