Weider WESY19611 user manual Do not attach a Nylon Jamnut not shown yet

Page 16

37.Identify the Resistance Cable (27). Thread the 1/2” Plain Nut (101) onto the bolt at the end of the Resistance Cable (27). Thread the Resistance Cable part way into the lower end of the Weight Tube (63). Tighten the Plane Nut against the Weight Tube.

38.Wrap the Resistance Cable (27) around a 3 1/2” Pulley (15). Attach the Pulley inside of the indicat- ed bracket on the Base (4) with a 3/8” x 2” Bolt (12) and a 3/8” Nylon Locknut (21).

39.Wrap the Resistance Cable (27) up around a 3 1/2” Pulley (15). Attach the Pulley and a Cable Trap (66) to the 3/8” x 3 1/2” Bolt (16) in the Base (4) with a 3/8” Nylon Locknut (21).

40.Wrap the Resistance Cable (27) around a 3 1/2” Pulley (15). Attach the Pulley and another 3 1/2” Pulley (15) inside of the wide bracket on the Base

(4) with a 3/8” x 3” Grade 5 Bolt (98) as shown.

Do not attach a Nylon Jamnut (not shown) yet.

	37
	63
	101
	27
	38
	21	4
	15	4
	15
		12
	27
	39
	21	27
		27
	15
		16
	66
		4
	40
		15
	27	98
	27
	15
		4

16

Image 16

Contents QUESTIONS? Model No. WESY19611 Serial NoTable of Contents Important Precautions Before YOU Begin Assembly Make Assembly Easier for YourselfLocknuts yet Nylon Locknuts yetTighten all of the 5/16 Nylon Locknuts 3 used in steps 1 to ARM Assembly Nylon Locknut the Press Frame must be able to pivot freelyArm. Arm identification is very important for Step Nylon Locknut yetNylon Locknut the Rocker Arm must be able to pivot freely Tighten the four 5/16 Nylon Locknuts 3 used in this stepNylon Jamnut the Leg Lever must be able to pivot freely Identify the High Cable 23. Wrap the High Cables. Important While assemblingCable is between the Pulley and the hook Not shown Page Stabilizer is wrapped around the Weight Tube Trap is turned to hold the Cable in placePage 15 66 Page Do not attach a Nylon Jamnut not shown yet Inside of the Press Cable Nylon Jamnut the Cable must be able to pivot FreelySeat Assembly That the Press Adjustment Tube is oriented as ShownAdjustments Changing the Weight SettingAttaching the LAT BAR or Nylon Strap to the Pulley Stations TROUBLE-SHOOTING and Maintenance Tightening the CablesWeight Resistance Chart 3 2Cable Diagrams Weight StackLow Cable High Cable Resistance CableRound Inner Cap Part Identification CHART-WESY19611 R0102APage Part LIST-Model No. WESY19611 Key No. Qty DescriptionExploded DRAWING-Model Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT