Weider user manual Part Identification CHART-WESY19611, R0102A

Page 25

PART IDENTIFICATION CHART—WESY19611

R0102A

1/4" Washer (10)

5/16" Washer (8)

3/8" Washer (9)

1/4" Nylon Locknut (2)

5/16" Nylon Jamnut (99)

5/16" Nylon Locknut (3)

3/8" Nylon Jam Nut (33)

3/8" Nylon Locknut (21)

1/2" Plain Nut (101)

5/16" x 1 3/4" Bolt (72)

3/8" x 2" Bolt (12)

3/8" x 2 1/4" Bolt (14)

1/4" x 2 1/4" Screw (24)

1/4" x 2 1/2" Screw (43)

5/16" x 2 1/2" Bolt (22)

3/8" x 2 1/2" Bolt (7)

1/4" x 2 1/2" Carriage Bolt (38)

5/16" x 2 1/2" Carriage Bolt (1)

Image 25

Contents Model No. WESY19611 Serial No QUESTIONS?Table of Contents Important Precautions Before YOU Begin Make Assembly Easier for Yourself AssemblyLocknuts yet Nylon Locknuts yetTighten all of the 5/16 Nylon Locknuts 3 used in steps 1 to Nylon Locknut the Press Frame must be able to pivot freely ARM AssemblyNylon Locknut yet Arm. Arm identification is very important for StepNylon Locknut the Rocker Arm must be able to pivot freely Tighten the four 5/16 Nylon Locknuts 3 used in this stepNylon Jamnut the Leg Lever must be able to pivot freely Identify the High Cable 23. Wrap the High Cables. Important While assemblingCable is between the Pulley and the hook Not shown Page Trap is turned to hold the Cable in place Stabilizer is wrapped around the Weight TubePage 15 66 Page Do not attach a Nylon Jamnut not shown yet Nylon Jamnut the Cable must be able to pivot Freely Inside of the Press CableThat the Press Adjustment Tube is oriented as Shown Seat AssemblyChanging the Weight Setting AdjustmentsAttaching the LAT BAR or Nylon Strap to the Pulley Stations Tightening the Cables TROUBLE-SHOOTING and Maintenance3 2 Weight Resistance ChartWeight Stack Cable DiagramsLow Cable High Cable Resistance CableRound Inner Cap R0102A Part Identification CHART-WESY19611Page Key No. Qty Description Part LIST-Model No. WESY19611Exploded DRAWING-Model Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT