Weider WESY19740 user manual Locknuts yet

Page 8

6.Attach the Top Frame (4) to the Upright (3) with two M8 x 65mm Bolts (68), two M8 Washers (59), and two M8 Nylon Locknuts (58). Do not tighten the Locknuts yet.

Attach the Top Frame (4) between the Weight Guides (21) with an M10 x 155mm Bolt (74), two M10 Washers (57), two 19mm Spacers (76), and an M10 Nylon Locknut (56). Do not tighten the

Locknuts yet.

7.Attach the Left Cap (19) and the Right Cap (20) to the bottom of the Shroud (17) with two M5 x 20mm Self-tapping Screws (64) and two M5 Washers (72).

Attach the Top Cap (18) to the top of the Shroud (17) with two M6 x 16mm Screws (62), four M6 Washers (82), and two M6 Locknuts (87).

6
	68	56 57	76
	68
	59		57
	59		74
			74
4
	58	58
	58
		3
		21	21
		21
7	82
62	82
62
		87	82
18			82
			62
17
20
72
64	72	19
	72	19

8

Image 8

Contents Customer HOT Line QUESTIONS?Model No. WESY19740 Serial No Table of Contents Important Precautions Right Side Before YOU BeginLeft Side Assembly Make Assembly Easier for YourselfFrame Assembly Locknuts yetTube is oriented as shown Locknut yetBumper is pointing up Locknuts yet Arm Assembly Cable Assembly Assemble the Left Arm 10 in the same mannerPage Locate the Low Cable 53. Route the Cable Sure the Finger Guards are on the outside Bracket as shown Page Seat Assembly Page Adjustments Changing the Weight SettingAttaching the Accessories to a Pulley Station Using the Lock LeverARM Conversion Using the Curl PADLocking the Weight Stack Lbs Weight Resistance ChartWeight High Butterfly Press ARM LEG Lever LOW Pulley Cable Diagrams High CableArm Cable Low CableMaintenance Tightening the CablesExercise Guidelines Staying Motivated Muscle ChartCooling Down Part Identification Chart Part LIST-Model No. WESY19740 Qty DescriptionExploded DRAWING-Model No. WESY19740 41 57 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty