Weider WESY19740 user manual Arm Assembly

8.	Attach the Shroud (17) to the Top Frame (4) with	8
	two M6 x 16mm Screws (62) and two M6			4
	Washers (82).
		82
	Attach the Shroud (17) to the brackets on the	62
	Stabilizer (2) with two M6 x 16mm Screws (62)
	and two M6 Washers (82). Make sure the brack-			17
	ets are inside the Shroud.	62	82
	Tighten the Nylon Locknuts (56, 58) used in
	steps 2–7.
		62
		82
					Bracket
				82	2
					62
	Arm Assembly	9
			56	7
9.	Grease the M10 x 77mm Bolt (79). Orient the Leg			Grease
	Lever (8) with the welded support as shown.
			8
	Attach the Leg Lever to the Front Leg (7) with the
	Bolt and an M10 Nylon Locknut (56). Do not			79
	overtighten the Locknut; the Leg Lever must
	be able to pivot easily.	Welded
		Support
10.	Grease the M10 x 77mm Bolt (79). Attach the	10		4
	Pivot Frame (5) to the Top Frame (4) with the Bolt
	and an M10 Nylon Locknut (56). Do not over-
	tighten the Locknut; the Pivot Frame must be
	able to pivot easily.		56	79
	Attach the two Arm Pins (40) to the Pivot Frame	69	5	Holes
			Grease
	(5) with two M4 x 20mm Self-tapping Screws
	(69). Insert the Arm Pins into the two holes in the			3
	Upright (3).	40
				69
				40
		9