Weider WESY2916.0 user manual See the inset drawing and attach the other

7. Attach a Shroud Cover (23) to the Left and Right	7
Shrouds (21, 22) with two M6 x 28mm Bolts (94),		114
	94
four M6 Washers (114), and two M6 Nylon		107
	114
Locknuts (107).			114
	23		114	94
Attach the Shroud Cover (23) to the Top Frame
(4) with four M4 x 16mm Self-tapping Screws			110	110
(110) and four M4 Washers (104).
		104
See the inset drawing and attach the other	4		104
Shroud Cover (23) in the same manner.
	23
8. Note: Some parts have been removed to show	8
this step clearly.		96	109
Slide the two Weight Bumpers (71) onto the		80
Weight Guides (18). Orient nine Weights (19) with			80
		4
the pin holes on the bottom as shown. Slide the
Weights onto the Weight Guides.				77
Insert the Weight Tube Cap (76) into the Weight		18
Tube (20). Insert the Weight Tube into the nine				Grease
Weights (19). Make sure the pin on the Weight
Tube is oriented as shown.
Lubricate the indicated holes in a Weight (19)		Pin
with the included grease packet. Slide the Weight
onto the Weight Guides (18).			20
		Pin
Attach the Weight Guides (18) to the Top Frame		Hole
(4) with an M10 x 155mm Bolt (96), two M10			76
Washers (80), two 13mm Steel Spacers (109),
and an M10 Nylon Locknut (77).
				19
		71
	11