42.Attach the Seat (32) to the Seat Frame (8) with two M6 x 16mm Screws (88), an M6 x 32mm Screw (89), and an M6 Washer (114).
Insert the Seat Frame (8) into the Frame (9). Tighten the Seat Adjustment Knob (52) into the Frame and the Seat Frame. Make sure the
Adjustment Knob passes through one of the holes in the Seat Frame.
43.Insert a Pad Tube (13) through the indicated hole in the Front Leg (10). Slide a Foam Pad (36) onto each end of the Pad Tube.
Press a Pad Cap (37) into an end of each Foam Pad (36).
Repeat this step for the other Pad Tube (13) and the Leg Lever (12). Note: Lift the Leg Lever Cable (51) when inserting a Pad Tube through through the hole in the bottom of the Leg Lever.
44.Attach the Butterfly Cover (30) to the Butterfly Bracket (5) with four M4 x 12mm
23
42 |
|
|
|
32 |
|
|
|
|
|
| 114 |
8 |
|
| 89 |
|
|
| |
88 |
|
| |
|
| 9 | 52 |
43 |
|
|
|
37 |
|
| 10 |
|
|
| |
36 |
|
|
|
12 |
|
|
|
|
|
| 13 |
51 |
|
|
|
13 |
|
| 36 |
|
|
| |
|
|
| 37 |
44 |
|
|
|
| 102 |
|
|
30 | 102 | 5 |
|
|
| ||
|
|
|