Weider XR20 user manual

Page 16

36.Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in ADJUSTMENT, beginning on page 17 of this manual.

Before using the home gym system, pull each cable a few times to be sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE DIAGRAM on page 21 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables. See TROUBLE-SHOOTING AND MAINTE- NANCE on page 20.

16

Image 16

Contents Model No. WESY01190 Serial No QUESTIONS?Customer HOT Line Table of Contents Limited WarrantyImportant Precautions Assembled Dimensions Before YOU BeginAssembly Frame AssemblyChart located in the center of this manual Following Tools not Included are Required for AssemblyLocknuts yet Frame Assembly ARM Assembly Arm with the Left Arm 47 refer to step Indicated bracket on the Top FrameCable Assembly Cable Assembly Make sure that the Cable Trap Pulley are oriented as shown Inset shows view Locate the Medium Cable 58. RouteFrom other side Cable Assembly Seat Assembly Seat Assembly LEG Lever Assembly Curl Frame Assembly Cable 35 and the Curl Bar 77 as shownPage Adjustment Changing the Weight SettingUsing the Curl BAR Attaching and Removing the SeatAttaching the LEG Lever to the LOW Pulley Station Attaching and Removing the Curl FrameAdjusting the Short Cable Weight Resistance ChartTROUBLE-SHOOTING and Maintenance Tightening the CablesCable Diagram Long CableTOP View Medium CablePage Page Page Part LISTÑModel No. WESY01190 Key No. Qty DescriptionExploded DRAWINGÑModel No. WESY01190 Ordering Replacement Parts