Weider XR20 user manual Cable Diagram, Long Cable, TOP View, Medium Cable, Short Cable

Page 21

CABLE DIAGRAM

The diagram below shows the proper routing of the Short Cable (35), the Medium Cable (58), and the Long Cable (23). Use the diagram to be sure that the cables and the cable traps have been assembled correctly. If the cables have not been correctly routed, the home gym system will not function properly and damage may occur. The inset drawings show the proper positioning of the cable traps. The cable traps should be positioned so that the cables will not come off the pulleys. Be sure that the cable traps do not touch or bind the cables.

2

7

1ÑHigh Pulley

3

5

4

Long Cable (23)

TOP VIEW

6

5ÑLong ÒUÓ-Bracket

Medium Cable (58)

4

3

8ÑWeight Stack

2

2

Short Cable (35)

1

1ÑLow Pulley

21

Image 21

Contents QUESTIONS? Model No. WESY01190 Serial NoCustomer HOT Line Limited Warranty Table of ContentsImportant Precautions Before YOU Begin Assembled DimensionsFrame Assembly AssemblyChart located in the center of this manual Following Tools not Included are Required for AssemblyLocknuts yet Frame Assembly ARM Assembly Indicated bracket on the Top Frame Arm with the Left Arm 47 refer to stepCable Assembly Cable Assembly Make sure that the Cable Trap Pulley are oriented as shown Locate the Medium Cable 58. Route Inset shows viewFrom other side Cable Assembly Seat Assembly Seat Assembly Cable 35 and the Curl Bar 77 as shown LEG Lever Assembly Curl Frame AssemblyPage Changing the Weight Setting AdjustmentAttaching and Removing the Seat Using the Curl BARAttaching the LEG Lever to the LOW Pulley Station Attaching and Removing the Curl FrameWeight Resistance Chart Adjusting the Short CableTightening the Cables TROUBLE-SHOOTING and MaintenanceLong Cable Cable DiagramTOP View Medium CablePage Page Page Key No. Qty Description Part LISTÑModel No. WESY01190Exploded DRAWINGÑModel No. WESY01190 Ordering Replacement Parts