CABLE ASSEMBLY
19. Using a 3/8Ó x 3 1/2Ó Bolt (16), a 3/8Ó Flat | 19 |
|
|
Washer (9), and a 3/8Ó Nylon Locknut (21), |
|
| |
|
|
| |
secure a 3 1/2Ó Pulley (15) and a Cable Trap |
|
|
|
(66) to the upper hole in the Press Frame |
|
|
|
(17). Make sure that the Cable Trap and the |
|
|
|
Pulley are oriented as shown. |
|
|
|
Hold a 3 1/2Ó Pulley (15) inside the indicated |
|
|
|
bracket on the Press Frame (17). Using a 3/8Ó |
|
|
|
x 8Ó Bolt (59), two 3/8Ó Flat Washers (9), and | 15 |
|
|
a 3/8Ó Nylon Locknut (21), attach the Pulley to |
|
| |
the Press Frame as shown. | 66 | 16 | 59 |
| |||
|
|
| |
|
| 9 |
|
| 21 | 15 |
|
|
|
| |
|
| Bracket |
|
| 21 | 17 |
|
|
|
| |
| 9 |
|
|
20. Slide a Cable Trap (66) and a 3 1/2Ó Pulley | 20 |
|
|
(15) onto a 3/8Ó x 3 3/4Ó Bolt (71). Insert the |
|
| |
|
|
| |
Bolt into the indicated hole in the Front | 42 | 66 | 71 |
Upright (42) from the direction shown. Hand |
|
| |
|
|
| |
tighten a 3/8Ó Nylon Locknut (21) with a 3/8Ó | 9 |
|
|
Flat Washer (9) onto the Bolt. Be sure that |
|
| |
all parts are oriented as shown. Do not | 21 | 15 |
|
tighten the Nylon Locknut yet. |
|
|
|
21. Slide a Cable Trap (66) and a 3 1/2Ó Pulley | 21 |
|
|
(15) onto a 3/8Ó x 3 3/4Ó Bolt (71). Insert the |
| 71 | |
42 | 66 | ||
Bolt into the indicated hole in the Front |
|
|
|
Upright (42) from the direction shown. Hand |
|
|
|
tighten a 3/8Ó Nylon Locknut (21) with a 3/8Ó | 9 |
|
|
Flat Washer (9) onto the Bolt. Be sure that | 15 |
| |
all parts are oriented as shown. Do not | 21 |
|
|
tighten the Nylon Locknut yet. |
|
|
|
11