Weider WESY81080 manual Cable Diagram, Short Cable, Cable ID Chart Long Cable

Page 16

Cable Diagram

The Cable Diagram below shows the proper routing of the Short Cable (9) and the Long Cable (2). The numbers show the correct route for each Cable. Make sure the Cables are routed correctly, that the Pulleys move smoothly and that the Cable Traps do not touch or bind the Cables. Incorrect cable routing can damage the weight system.

	7	2
		2
		1
	8
		4
	5	Short Cable (9)
	5	3
	6
	3
	9	6
	9	5
		5
	4
		7
		8
	2	9
		9
		1
	Cable ID Chart
	9	Long Cable (2)
	2
		16

Image 16

Contents QUESTIONS? Model No. WESY81080 Serial NoTable of Contents Limited WarrantyImportant Precautions Before You Begin Assembly Four Stages of the Assembly ProcessFrame Assembly Do not tighten the Nylon Locknuts yetDo not tighten the Locknuts yet Locate and open the parts bag labeled Òarm ASSEMBLY.Ó Arm AssemblyTighten all Nylon Locknuts used in steps 3 through Tap two 1Ó Retainers 4 and a 1Ó Round Cover Cap Cable Assembly Nylon Jamnut. The Leg Lever should pivot freelyMake sure the Cable Trap 66 is positioned as shown Page Page Seat Assembly Locate and open the parts bag labeled Òseat ASSEMBLY.ÓMiscellaneous Assembly Cable ID Chart Long Cable Cable DiagramShort Cable Adjustment Changing the Weight SettingWeight Resistance Chart Trouble-shooting and Maintenance Tightening the CablesPart Identification ChartÑWESY81080 Page Page Exploded DrawingÑModel No. WESY81080 Part ListÑModel No. WESY81080 Qty DescriptionOrdering Replacement Parts