Weider WESY81080 manual Important Precautions

Page 3

Important Precautions

WARNING: To reduce the risk of serious injury, read the following important precautions before using the training system.

1.It is the responsibility of the owner to ensure that all users of the training system are ade- quately informed of all precautions.

2.Read all instructions in this manual and in the accompanying literature before using the training system.

3.If you feel pain or dizziness at any time while exercising, stop immediately and begin cool- ing down.

4.Use the training system only on a level sur- face. Cover the floor or carpet beneath the training system for protection.

5.Inspect and tighten all parts often. Replace any worn parts immediately.

6.Make sure the cables remain on the pulleys at all times. If the cables bind while you are exercising, stop immediately and make sure the cables are on all of the pulleys.

7.Always stand on the foot plate when perform- ing an exercise that could cause the training system to tip.

8.Keep children under the age of 12 and pets away from the training system at all times.

9.Keep hands and feet away from moving parts.

10.The training system is designed to be used by only one person at a time.

11.Always wear athletic shoes for foot protec- tion when exercising.

12.Never release the press arm, butterfly arms, leg lever, lat bar, row bar or handle while weights are raised. The weights will fall with great force.

13.Always disconnect the lat bar or row bar from the training system when performing an exercise that does not use them.

14.The training system is intended for home use only. Do not use the training system in a commercial, rental or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

3

Image 3
Contents Model No. WESY81080 Serial No QUESTIONS?Limited Warranty Table of ContentsImportant Precautions Before You Begin Four Stages of the Assembly Process AssemblyDo not tighten the Nylon Locknuts yet Frame AssemblyDo not tighten the Locknuts yet Arm Assembly Locate and open the parts bag labeled Òarm ASSEMBLY.ÓTighten all Nylon Locknuts used in steps 3 through Tap two 1Ó Retainers 4 and a 1Ó Round Cover Cap Nylon Jamnut. The Leg Lever should pivot freely Cable AssemblyMake sure the Cable Trap 66 is positioned as shown Page Page Locate and open the parts bag labeled Òseat ASSEMBLY.Ó Seat AssemblyMiscellaneous Assembly Cable Diagram Cable ID Chart Long CableShort Cable Changing the Weight Setting AdjustmentWeight Resistance Chart Tightening the Cables Trouble-shooting and MaintenancePart Identification ChartÑWESY81080 Page Page Exploded DrawingÑModel No. WESY81080 Qty Description Part ListÑModel No. WESY81080Ordering Replacement Parts