Weider WESY39311 user manual Locate and open the parts bag labeled Seat Assembly

Page 18

SEAT ASSEMBLY

37.Locate and open the parts bag labeled “SEAT ASSEMBLY.”

Insert a 1/4” x 2 1/2” Carriage Bolt (92) through the center hole in a Seat Plate (37). Attach the Seat Plate to the Leg Press Backrest (85) with two 1/4” x 3/4” Screws (18).

Insert the 1/4” x 2 1/2” Carriage Bolt (92) through the indicated hole in the Leg Press Upright (56). Tighten a 1/4” Nylon Locknut (2) with a 1/4” Washer

(10)onto the Carriage Bolt. Attach the top of the Leg Press Backrest (85) to the Leg Press Upright with a 1/4” x 2 1/2” Screw (43) and a 1/4” Washer

38.Attach one end of a Seat (13) to the Leg Press Seat Frame (79) with two 1/4” x 3/4” Screws (18). Attach the other end of the Seat to the Leg Press Seat Frame with a 1/4” Washer (10) and a 1/4” x 2 1/2” Screw (43).

39.Attach the Front Backrest (41) to the Front Upright

(42)with two 1/4” x 2 1/2” Screws (43) and two 1/4” Washers (10). Note: Make sure the Backrest is oriented as shown.

40.Press a 1 1/2” Square Inner Cap (32) into the Front Seat Frame (36).

Insert a 1/4” x 2” Carriage Bolt (38) through the cen- ter hole in the Seat Plate (37). Attach the Seat Plate to the Seat (13) with two 1/4” x 3/4” Screws (18).

Insert the 1/4” x 2” Carriage Bolt (38) through the indicated hole in the Front Seat Frame (36). Tighten a 1/4” Nylon Locknut (2) with a 1/4” Washer (10) onto the Carriage Bolt.

Attach the other end of the Seat (13) to the Front Seat Frame (36) with a 1/4” Washer (10) and a 1/4” x 2” Machine Screw (81).

18

37

85

 

 

 

56

 

 

 

 

37

92

 

 

18

 

 

10

 

 

 

43

 

 

 

2

 

 

 

38

 

13

 

 

 

 

 

 

18

 

 

 

79

 

 

10

 

 

43

 

39

42

 

 

 

 

 

 

 

41

 

43 10

 

 

 

 

 

Thick

 

 

 

End

 

40

 

 

 

 

 

13

 

 

 

38

 

 

37

 

 

 

 

18

32

 

 

 

 

 

36

 

81

10

2

 

 

 

 

Image 18
Contents QUESTIONS? Model No. WESY39311 Serial NoCustomer HOT Line Table of Contents Important Precautions Before YOU Begin Decal NoQuestions? AssemblyFollowing Tools not Included are Required for Assembly Nylon Locknuts yetLocknuts yet Do not tighten the Nylon Locknuts yetDo not tighten the 5/16 Nylon Locknuts 3 yet Tighten all 5/16 Nylon Locknuts 3 used in stepsOn the Weight Tube is sitting in the pin grooves Top Weight Weight Guides are at the top, as shownHoles in the Weight Guides are at the top, as Shown Locate and open the parts bag labeled ARM Assembly Nylon Locknut the Leg Press Arm must be able to pivot freelyNylon Locknut yet Cable Assembly Locknut the Pulley Bracket must be able to move freely Page 2 Low Pulley 76. Attach the Pulley Locate the Low Cable 23 and the bag labeledLOW PULLEY. Route the Low Cable under X 9/16 Spacer 7 to the Press Frame 17 withPage Cable Trap is positioned to hold the Cable in place Page Seat Assembly Locate and open the parts bag labeled Seat AssemblyPage Page Adjustments Changing the Weight SettingAdjusting the LEG Press Plate Attaching and Removing the SeatAttaching the LEG Lever to the LOW Pulley Station Weight Resistance Chart PlatesTROUBLE-SHOOTING and Maintenance Tightening the CablesTOP View Cable DiagramsHigh Cable 58 and Low Cable High CableMilitary Press Cable 72 and Leg Press Cable Leg Press CablePage Exploded DRAWING-Model No. WESY39311 Page Page Part LIST-Model No. WESY39311 Exploded Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT