2.Slide the Rear Upright (74) and the Leg Press Upright (56) onto the indicated 5/16” x 2 1/2” Carriage Bolts (1) in the Stabilizer (5). The high side of the brackets on the Rear Upright and Leg Press Upright should be on the side shown. Hand tighten four 5/16” Nylon Locknuts (3) onto the Carriage Bolts. Do not tighten the Nylon
Locknuts yet.
Press a 2” Square Inner Cap (27) into the Leg Press Upright (56). Press a 2” Square Inner Cap into the Rear Upright (74).
Attach the Rubber Bumper (91) to the Leg Press Upright (56) with the #8 x 1/2”
3.Slide the Front Upright (42) onto the 5/16” x 2 1/2” Carriage Bolts (1) in the Base (4). Hand tighten a 5/16” Nylon Locknut (3) onto each Carriage Bolt.
Do not tighten the Nylon Locknuts yet.
Press a 1” Square Inner Cap (6) into the Front Upright (42).
6
2 |
| 27 |
| 27 | |
|
| |
| 87 | High Sides |
|
| |
| 91 | of Brackets |
74 |
| |
|
| |
|
| 56 |
|
| 3 |
| 3 |
|
|
| 5 |
3 |
| 1 |
|
| |
| 1 |
|
3 |
|
|
|
| 42 |
|
| 6 |
|
| 3 |
| 4 |
|
|
| 1 |