Weider user manual Exploded DRAWING-Model No. WESY39311

Page 28

EXPLODED DRAWING—Model No. WESY39311

1/4" x 2" Machine Screw (81)

3/8" Nylon Locknut (21)

3/8" Washer (9)

3/8" Nylon Jamnut (99)

5/16" x 1 3/4" Bolt (24)

5/16" Washer (8)

5/16" Nylon Locknut (3)

#8 x 1/2" Self-

tapping Screw (87)

1/4" Washer (10)

5/16" Nylon Jamnut (93)

1/4" x 3/4" Screw (18)

1/4" Nylon Locknut (2)

Cable Clip (53)

1" x 7/8" Plastic Bushing (90)

1 1/8" x 2 1/2" Plastic Bushing (89)

R0402A

3/8" x 8" Bolt (59)

"V"-Pulley (50)	3 1/2" Pulley (15)
(Not shown to scale)	(Not shown to scale)	1" Retainer (69)

Image 28

Contents Model No. WESY39311 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Before YOU Begin Decal NoAssembly Following Tools not Included are Required for AssemblyQuestions? Nylon Locknuts yetLocknuts yet Do not tighten the Nylon Locknuts yetDo not tighten the 5/16 Nylon Locknuts 3 yet Tighten all 5/16 Nylon Locknuts 3 used in stepsWeight Guides are at the top, as shown On the Weight Tube is sitting in the pin grooves Top WeightHoles in the Weight Guides are at the top, as Shown Locate and open the parts bag labeled ARM Assembly Nylon Locknut the Leg Press Arm must be able to pivot freelyNylon Locknut yet Cable Assembly Locknut the Pulley Bracket must be able to move freely Page Locate the Low Cable 23 and the bag labeled LOW PULLEY. Route the Low Cable under2 Low Pulley 76. Attach the Pulley X 9/16 Spacer 7 to the Press Frame 17 withPage Cable Trap is positioned to hold the Cable in place Page Seat Assembly Locate and open the parts bag labeled Seat AssemblyPage Page Adjustments Changing the Weight SettingAttaching and Removing the Seat Adjusting the LEG Press PlateAttaching the LEG Lever to the LOW Pulley Station Weight Resistance Chart PlatesTROUBLE-SHOOTING and Maintenance Tightening the CablesCable Diagrams High Cable 58 and Low CableTOP View High CableMilitary Press Cable 72 and Leg Press Cable Leg Press CablePage Exploded DRAWING-Model No. WESY39311 Page Page Part LIST-Model No. WESY39311 Exploded Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT