Weider WESY68633 user manual Around and reattach it, Do not tighten the Locknut yet

10.	Attach the Lat Tower (5) to the Upright (3) with	10
	four M10 x 25mm Screws (100) and four M10
	Lock Washers (74).
	Plug the Upper Wire Harness (13) into the
	Console (53). Push all of the excess wire into
	the Upright (3). Make sure the wire does not				5
	get pinched. Attach the Console to the Upright
	with two M4 x 16mm Screws (103).
				74		100
		103		13
							100
		53
				103		3	74
11.	Attach two Eyebolts (51) to the Lat Tower	11
			96
	Crossbar (49) with two M8 Washers (76) and two			73
	M8 Nylon Locknuts (70).	70			50
	Attach the Lat Tower Crossbar (49) to the Lat	76
	Tower (5) with two M10 x 65mm Button Bolts
	(96), two M10 Washers (73), and the Crossbar	51				49
	Cover (50). Make sure that the Eyebolts (51)
	are oriented as shown in the inset drawing. If						70
	they are not, turn the Lat Tower Crossbar	49	Side View
	around and reattach it.						76
		51		5		5	51
12.	Attach a Large Pulley (17) and the Pulley Plate	12
	(18) to the Upright (3) with an M12 x 62mm
	Button Bolt (80) and an M12 Nylon Locknut (72).
	Do not tighten the Locknut yet.
							72
		80				17	18
			3
		10