Weider WESY49201 user manual Assembly, Locate the Leg Press Cable, Washer

Page 18

38. Locate the Leg Press Cable (99).

Attach the

end of the Leg Press Cable to the Long “U”-

 

Bracket (57) with a 1/4” Nylon Locknut (2) and

a 1/4” Washer (10).

Do not completely tight-

en the Nylon Locknut. It should be thread-

 

ed onto the end of the Cable only a couple

 

of turns, as shown in the inset drawing.

 

Wrap the Leg Press Cable (99) around a

3 1/2” Pulley (15). Attach the Pulley to the Leg Press Upright (56) with the 3/8” x 3 3/4” Bolt (88), a 3/8” Washer (9), and a 3/8” Nylon Locknut (21). The ball on the Cable must be

on the indicated side of the Pulley. Be sure that the Cable and Pulley move smoothly and that the Cable is between the Pulley and the welded rod.

ASSEMBLY

39.

and a 5/16” Nylon Locknut (3).

 

Attach the Press Bracket (94)

to the Leg

CABLE

 

Press Arm (96) with a 5/16” x 3” Bolt (111)

 

Wrap the Leg Press Cable (99)

around a 3 1/2”

 

 

Pulley (15). Attach the Pulley to the Press

Bracket (94) with the 3/8” x 2” Bolt (12) and a 3/8” Nylon Locknut (21).

Slide a 5/16” Washer (8) onto a 5/16” x 2 3/4” Bolt (11). Insert the Bolt through the lowest

hole in the Rear Seat Frame (100) from the

indicated side. Note: The three holes are for

cable adjustment. Tighten a 5/16” Nylon Jamnut (93) onto the Bolt. Slide the end of

the Leg Press Cable (99) onto the end of the Bolt. Thread another 5/16” Nylon Jamnut onto the Bolt. Do not fully tighten the second

Jamnut. There must be room between the two Jamnuts for the end of the Cable to pivot.

18

38

 

 

 

 

2

 

10

57

 

99

 

 

56

 

 

Ball

 

88

 

 

15

 

 

9

 

 

21

 

 

Welded

 

2

Rod

 

 

 

10

 

99

57

 

 

 

39

 

 

 

 

96

 

 

12

11

 

3

 

 

 

8

94

 

99

111

 

 

15

 

 

21

 

100

 

 

 

93

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Table of Contents QUESTIONS?Important Precautions Always stand on the foot plate when perDecals shown below have been placed Before YOU Begin Following Tools not Included are Required for Assembly AssemblyFrame Assembly Frame AssemblyDo not tighten Press a 1 Square Inner Cap 6 into Front Upright100 Each stack of WeightsOn the Top Frame. Press two 1 Inner Caps Bracket GroovesHoles WeightStack of Weights 25. Insert both Long 108Frame Assembly ARM Assembly ARM AssemblyDo not over Do not tighten the Nylon Locknut yet See the inset drawing Must also be below the welded bracket onAssist Upright ARM Assembly Cable Assembly Locate the High Cable 58. Wrap the HighDo not overtighten Be sure thatCable in place PlaceBled Attached partsOriented as shown Frame Locate the Low CableThat the Cable is between ShownLocate the Military Press Cable Locknut 2 and a 1/4 WasherShown in the inset drawing A 1/4 WasherA 3/8 Nylon Locknut That the Cable and Pulley move smoothly8 x 4 1/2 Bolt 112, a 3/8 Washer Around the Pulley as shownSee inset drawing B Cable in place See inset drawing aAssembled Pivot4 Washer AssemblyLocate the Leg Press Cable Indicated side. Note The three holes are forAttach the Assist Seat 104 and the Angle Seat AssemblyAttach one end of a Seat 13 to the Rear 104 110 105 114Front Seat Frame 36 with a 1/4 Washer ScrewsWasher 10 onto the Carriage Bolt A 1/4 x 2 Machine ScrewOn the following Press two 3/4 Round Inner Caps 34 into each Pad TubeAttaching the LAT BAR or Nylon Strap to High Pulley Station AdjustmentsChanging the Weight Setting Attaching the LAT BAR or Nylon Strap to LOW Pulley StationAttaching the LEG Lever to the LOW Pulley Station Adjusting the LEG Press PlateAttaching and Removing the Seat Press ArmLbs Top 123 104 171 132 111 155 115 219 117 154 110 131 191 Weight Resistance ChartLbs 387 232 218 440 256 246 455 293Be tightened TROUBLE-SHOOTING and MaintenanceTightening the Cables Must be moved to the next hole in the Rear SeatBe sure that the cable traps Cable DiagramsDo not touch or bind the cables High Cable 58 and Low Cable Low CableMilitary Press Cable 72 and Leg Press Cable Rear Seat FrameLeg Press Cable Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty Part No R0602AIt has been pre-assembled Part from the Part List in the center of this manualShipping purposes. If you cannot find a part in the parts StagePart Identification CHART-Model No. WESY49201 R0602APulley 50 Not shown to scale 2 Pulley 15 Not shown to scale Round Inner Cap X 9/16 Spacer Round Cover Cap Save this Part LIST/EXPLODED Drawing for Future Reference Part LIST-Model No. WESY49201 Qty DescriptionExploded DRAWING-Model No. WESY49201

WESY49201 specifications

The Weider WESY49201 is a versatile home gym system designed to help fitness enthusiasts achieve their workout goals without leaving the comfort of their homes. This multi-station weight system is particularly favored for its balance of functionality, durability, and compact design, catering to a wide range of exercises and fitness levels.

One of the primary features of the WESY49201 is its adjustable seat and backrest, which enhance user comfort and support during workouts. This feature is crucial for ensuring proper form and reducing the risk of injury. The equipment also comes with an extensive range of resistance options, allowing users to customize their workouts according to their individual strength levels and fitness objectives. This customization is facilitated by the inclusion of a weight stack system that provides effective resistance during various exercises.

The Weider WESY49201 is equipped with a number of workout stations, including a chest press, leg extension, and lat pulldown, each designed to target specific muscle groups. This multifunctionality allows users to perform a comprehensive workout routine targeting both upper and lower body muscles without requiring multiple pieces of equipment. Additionally, the integrated pull-up bar and preacher curl pad further expand the training possibilities.

Another notable characteristic of this home gym is its compact footprint, making it an ideal solution for individuals with limited space. Despite its smaller size, the WESY49201 does not compromise on stability or sturdiness, thanks to its heavy-duty steel construction. This durability ensures that users can rely on the equipment for a long time, even with regular use.

The assembly of the Weider WESY49201 is relatively straightforward, and the product comes with detailed instructions to aid users in setting it up efficiently. This feature, combined with its sturdy design, ensures that it remains stable during intense workouts.

In summary, the Weider WESY49201 stands out as a comprehensive solution for home fitness enthusiasts looking to build strength and improve overall fitness. With its variety of workout stations, user-friendly design, and ability to cater to multiple fitness levels, it serves as an excellent addition to any home gym, enabling users to perform a wide range of exercises while promoting health and wellness.
Top Page Image Contents