Weider WESY49201 user manual Do not tighten the Nylon Locknut yet

Page 9

ARM ASSEMBLY

12.Press a 1” Round Inner Cap (49) into one of the Press Arms (46). Press a 1 3/4” Square Inner Cap (44) into the Press Arm.

Attach the Press Arm (46) to one side of the

Press Frame (17) with two 5/16” x 2 1/2” Bolts (22) and two 5/16” Nylon Locknuts (3).

Assemble the other Press Arm (46) in the same manner.

13.Identify the Right Arm (48) and the Left Arm (47). Note the position of the welded bracket

on each Arm. Arm identification is very important for step 14.

Attach a “V”-Pulley (50) and a Long Cable Trap (31) to the Right Arm (48) with a 3/8” x

2 1/2” Bolt (86) and a 3/8” Nylon Locknut (21).

Do not tighten the Nylon Locknut yet.

Attach a “V”-Pulley (50) and a Long Cable Trap (31) to the Left Arm (47) in the same manner.

14. Lubricate both axles on the Top Frame (55).

Slide the Right Arm (48) onto the right axle.

Note: Be careful not to confuse the Right

Arm with the Left Arm (47); refer to step 13 to identify the Right Arm. Be sure that the upper end of the Right Arm is behind the indicated bracket on the Top Frame (55).

Tap two 1” Retainers (69) and a 1” Round

Cover Cap (70) onto the axle. Be sure that the teeth on the Retainers bend toward the

Round Cover Cap, as shown in the inset drawing.

Attach the Left Arm (47) in the same manner.

Press 1 3/4” Square Inner Caps (44) into the lower ends of the Right and Left Arms (47, 48). Wet the lower end of each Arm with soapy water. Slide a 10” Pad (45) onto the lower end of each Arm.

9

12

 

 

44

49

 

 

 

 

 

 

 

 

46

 

 

22

 

 

 

46

 

 

 

 

 

 

3

 

 

 

 

17

 

13

86

 

31

 

 

31

 

50

 

 

 

 

 

Welded

50

 

 

47

 

 

 

Brackets

 

 

 

 

 

 

21

 

 

48

 

 

 

14

 

 

 

 

 

 

55

Bracket

 

 

 

 

 

 

 

 

 

47

 

 

 

Lubricate

 

 

 

 

Axle

 

 

48

 

 

 

 

 

 

69

 

 

 

 

 

45

 

 

 

70

 

 

 

 

 

44

 

44

 

Axle

 

 

45

 

 

69

 

 

 

 

70

Page 8 Page 10
Image 9
Page 8 Page 10
Contents QUESTIONS? Table of ContentsImportant Precautions Always stand on the foot plate when perDecals shown below have been placed Before YOU Begin Frame Assembly AssemblyFollowing Tools not Included are Required for Assembly Frame AssemblyPress a 1 Square Inner Cap 6 into Front Upright Do not tightenOn the Top Frame. Press two 1 Inner Caps Each stack of Weights100 Bracket GroovesStack of Weights 25. Insert both Long WeightHoles 108Frame Assembly ARM Assembly ARM AssemblyDo not over Do not tighten the Nylon Locknut yet See the inset drawing Must also be below the welded bracket onAssist Upright Locate the High Cable 58. Wrap the High ARM Assembly Cable AssemblyCable in place Be sure thatDo not overtighten PlaceBled Attached partsOriented as shown That the Cable is between Locate the Low CableFrame ShownShown in the inset drawing Locknut 2 and a 1/4 WasherLocate the Military Press Cable A 1/4 Washer8 x 4 1/2 Bolt 112, a 3/8 Washer That the Cable and Pulley move smoothlyA 3/8 Nylon Locknut Around the Pulley as shownAssembled Cable in place See inset drawing aSee inset drawing B PivotLocate the Leg Press Cable Assembly4 Washer Indicated side. Note The three holes are forAttach one end of a Seat 13 to the Rear Seat AssemblyAttach the Assist Seat 104 and the Angle 104 110 105 114Washer 10 onto the Carriage Bolt ScrewsFront Seat Frame 36 with a 1/4 Washer A 1/4 x 2 Machine ScrewPress two 3/4 Round Inner Caps 34 into each Pad Tube On the followingChanging the Weight Setting AdjustmentsAttaching the LAT BAR or Nylon Strap to High Pulley Station Attaching the LAT BAR or Nylon Strap to LOW Pulley StationAttaching and Removing the Seat Adjusting the LEG Press PlateAttaching the LEG Lever to the LOW Pulley Station Press ArmLbs Weight Resistance ChartLbs Top 123 104 171 132 111 155 115 219 117 154 110 131 191 387 232 218 440 256 246 455 293Tightening the Cables TROUBLE-SHOOTING and MaintenanceBe tightened Must be moved to the next hole in the Rear SeatDo not touch or bind the cables High Cable 58 and Low Cable Cable DiagramsBe sure that the cable traps Low CableMilitary Press Cable 72 and Leg Press Cable Rear Seat FrameLeg Press Cable Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Part No R0602AShipping purposes. If you cannot find a part in the parts Part from the Part List in the center of this manualIt has been pre-assembled StageR0602A Part Identification CHART-Model No. WESY49201Pulley 50 Not shown to scale 2 Pulley 15 Not shown to scale Round Inner Cap X 9/16 Spacer Round Cover Cap Save this Part LIST/EXPLODED Drawing for Future Reference Qty Description Part LIST-Model No. WESY49201Exploded DRAWING-Model No. WESY49201

WESY49201 specifications

The Weider WESY49201 is a versatile home gym system designed to help fitness enthusiasts achieve their workout goals without leaving the comfort of their homes. This multi-station weight system is particularly favored for its balance of functionality, durability, and compact design, catering to a wide range of exercises and fitness levels.

One of the primary features of the WESY49201 is its adjustable seat and backrest, which enhance user comfort and support during workouts. This feature is crucial for ensuring proper form and reducing the risk of injury. The equipment also comes with an extensive range of resistance options, allowing users to customize their workouts according to their individual strength levels and fitness objectives. This customization is facilitated by the inclusion of a weight stack system that provides effective resistance during various exercises.

The Weider WESY49201 is equipped with a number of workout stations, including a chest press, leg extension, and lat pulldown, each designed to target specific muscle groups. This multifunctionality allows users to perform a comprehensive workout routine targeting both upper and lower body muscles without requiring multiple pieces of equipment. Additionally, the integrated pull-up bar and preacher curl pad further expand the training possibilities.

Another notable characteristic of this home gym is its compact footprint, making it an ideal solution for individuals with limited space. Despite its smaller size, the WESY49201 does not compromise on stability or sturdiness, thanks to its heavy-duty steel construction. This durability ensures that users can rely on the equipment for a long time, even with regular use.

The assembly of the Weider WESY49201 is relatively straightforward, and the product comes with detailed instructions to aid users in setting it up efficiently. This feature, combined with its sturdy design, ensures that it remains stable during intense workouts.

In summary, the Weider WESY49201 stands out as a comprehensive solution for home fitness enthusiasts looking to build strength and improve overall fitness. With its variety of workout stations, user-friendly design, and ability to cater to multiple fitness levels, it serves as an excellent addition to any home gym, enabling users to perform a wide range of exercises while promoting health and wellness.
Top Page Image Contents