24.Route the Lat Cable (88) over a 3 1/2” Pulley (78). Slide a plastic Long Cable Trap (102) onto a 3/8” x 1 3/4” Bolt (93). Attach the Pulley to the indicated bracket on the Top Frame (6) with the Bolt and a 3/8” Nylon Locknut (113). Make sure that the Long
Cable Trap is turned to hold the Cable in the groove of the Pulley.
25.Remove the preassembled 3/8” Nylon Locknut (87) and 3/8” x 2” Bolt (100) from the Pulley Plates (63).
Wrap the Lat Cable (88) under a 3 1/2” Pulley (78). Attach the Pulley and a Cable Trap (68) between the indicated holes in the Pulley Plates (63) with the 3/8” x 2” Bolt (100) and the 3/8” Nylon Locknut (87).
Make sure that the Cable Trap is turned to hold the Cable in place.
26.Attach the end of the Lat Cable (88) inside of the Butterfly Top Frame (7) with a 5/16” x 2 1/2” Bolt (59), two 5/16” Washers (90), and a 5/16” Nylon Locknut (86).
27.Locate the Butterfly Cable (69), which is the shortest Cable. Attach the Cable to the Pivot Bracket (70) on the Left Butterfly Arm (25) with a 5/16” x 1” Shoulder Bolt (103) and a 5/16” Nylon Locknut (86).
13
24 |
|
|
| 88 |
| 6 |
| 78 | |
| 113 |
|
| |
|
|
|
| |
|
|
|
| 102 |
|
|
|
| 93 |
25 |
|
|
|
|
|
| 100 88 |
|
|
|
|
|
| 78 |
|
|
|
| 87 |
|
| 68 |
| |
|
| 63 |
|
|
|
|
| 63 |
|
26 | 86 |
| 90 |
|
|
|
| 7 | 90 |
|
|
| 59 | |
|
|
|
| |
|
| 88 |
|
|
27 |
|
|
|
|
|
| 86 | 69 |
|
|
|
|
| 103 |
|
|
| 70 |
|
|
|
| 25 |
|