52.Press two 3/4” x 1 1/2” Inner Caps (116) and a 1 1/4” Square Inner Cap (117) into the Seat Bracket (11).
Attach the Seat (16) to the Seat Bracket (11) with two 1/4” x 3/4” Screws (114), a 1/4” x 1 1/2” Screw (99), and a 1/4” Washer (97).
Turn the indicated Adjustment Handle (65) counter- clockwise several turns to loosen it. Next, pull the Handle and insert the Seat Bracket (11) into the Seat Frame (8). Engage the Handle into one of the holes in the Seat Bracket, and then turn the Handle clockwise until it is tight.
53.Press two 3/4” x 1 1/2” Inner Caps (116) and a 1 1/4” Square Inner Cap (117) into the Backrest Bracket
Attach the Butterfly Backrest (15) to the Backrest Bracket (13) with four 1/4” x 3/4” Screws (114).
Turn the indicated Adjustment Handle (65) counter- clockwise several turns to loosen it. Next, pull the Handle and insert the Backrest Bracket (13) into the Butterfly Upright (3). Engage the Handle into one of the holes in the Backrest Bracket, and then turn the Handle clockwise until it is tight.
54.Attach the VKR Backrest (46) to the VKR Upright
(5)with four 1/4” x 3/4” Screws (114).
55.Wet one end of the Squat Arm (32) with soapy water. Slide a Short Pad (20) onto the Squat Arm as shown.
Attach a Squat Handle (33) to the Squat Arm (32) with two 5/16” x 3/4” Button Head Screws (51) and two Nut Clips (108). Slide an Inner Cap w/Hole
(111)onto the Squat Handle and press it onto the end of the Squat Arm. Wet the Squat Handle with soapy water. Slide an 8” Handgrip (84) onto the Squat Handle.
Repeat this step with the other end of the Squat Arm (32).
20
52 |
|
|
16 |
|
|
|
| 116 |
11 |
| 97 |
116 | 99 |
|
114 | 117 |
|
| 8 |
|
| 65 |
|
53 | 116 | 3 |
| ||
15 |
| 114 |
|
| |
|
| 65 |
|
| 117 |
|
| 114 |
| 13 |
|
| 116 |
|
54 |
|
|
46 |
|
|
| 5 | 114 |
|
| |
55 | 20 |
|
32 |
| |
|
| |
| 51 |
|
| 20 |
|
51 |
|
|
| 108 | 33 |
|
| |
| 111 |
|
| 84 |
|