Part Identification Chart

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. Extra parts may be included. If a part is missing, please call 1-877-992-5999.

M6 Washer	M8 Washer	M10 Washer
(33)–8	M8 Washer	M10 Washer
	(35)–8	(28)–4
M8 Locknut	M10 Locknut	M12 Locknut
(36)–8	(30)–1	M12 Locknut
		(26)–1
M6 x 20mm	M6 x 65mm	M8 x 42mm Bolt
Screw (31)–4	Screw (32)–8	(34)–8
M10 x 20mm	M10 x 80mm Screw (27)–4
Screw (29)–5
	M12 x 132mm Bolt (25)–1
	5