Daewoo Auto Washer, DWF-176S Cleaning the Lint Filter, Cleaning the Water Inlet Filter

Page 7

HOW TO CLEAN THE FILTER

CLEANING THE LINT FILTER

This washer has two type of Lint Filter in order to increase lint filtering performance. Type I : It is assembled in the top area of Tub.

Pull the Filter frame

Turn the lint filter

1 upward.

2inside out, wash to

 

the lint off with water.

3Return the filter as it was, and insert the filter frame into the slot.

Lint Filter

Filter Frame

Type II : It is assembled in the middle area of Tub.

 

Pull the button with pressing

 

 

 

Open the Cover and get rid of

 

 

 

 

 

 

 

1 downward.

 

 

 

2lint being the Inside of Filter

 

 

 

 

 

 

then close the Cocer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CLEANING THE WATER INLET FILTER

• Clean the filter when water leaks from, the water inlet.

3Assemble the Lint Filter as it was, by pushing toward wall with fixing slot

Pull the

Turn off the

Pull the

1power plug

2 water supply

3 inlet filter out.

out before

to the washer

 

cleaning it.

and sperate the

 

 

inlet hose.

 

4 Remove the dirt from the inlet filter with a brush.

6CONVENIENCE

Image 7
Contents Auto Washer Washing Machine DWF-176S SpecificationsHOT Water TAP Structure of the Washing MachineInstalling Place Directions for Installation and USEFor SCREW-SHAPED TAP For Ordinary TAPCleaning the Water Inlet Filter Cleaning the Lint Filter4Clean the drain filter removing the foreign stuffs Cleaning the Drain FilterFunction for Soak Wash Feature and Technical ExplanationFeature of the Washing Machine Water Current to Adjust the Unbalanced LoadFunctional Principle Automatic Drainning Time AdjustmentFunctional Principle of Bubble Washing Machine Across SectionCIRCULATING-WATER Course and Lint Filter Automatic Unbalance AdjustmentCIRCULATING-WATER Drain Motor HOW to Replace Lint FilterLint Filter Residual Time DisplayGear Mechanism ASS’Y Gear Mechanism ASS’Y Replacement Directions for Disassembly and AdjustmentGear Mechanism Assy Replacement Pull out the gear mechanism assy Motor Synchronous and Valve Replacement NON Pump Model Alternative Tool for Replacing the Clutch Boss Assemble Structure of Gear MechanismProblem HOW to Check the Clutch Spring ProblemProcess Process of DisassembleProcess Process of Assemble Boss3.5~4.5mm Replace the Case Filter ASS’Y Concerning Water Supply Trouble Shooting GuideWater Supply is Not Stopped Concerning WashingConcerning Draining Spin No YES Concerning SpinningConcerning Operation Message Cause Solution Concerning Error MessagePresentation of the P.C.B ASS’Y Appendix Wiring DiagramNON-PUMP, Single Valve Pump Parts Diagram Parts Diagram Parts Diagram Parts List PCB AS T2S TRS 4X16 Mfzn Circuit Diagram Printed Date Feb