CLEANING THE DRAIN FILTER
•In case “U” shape drain hose, this filter’s equipped at the back side of washer.
•This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ...
•If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could be caused.
Put down the | Turn the cap counter | Pull out the filter assembly off | |
1 remained water in the | 2clockwise. | 3the case of the main body. | |
hose. And put a container |
|
| SLIT |
under the filter to collect |
| FILTER | |
|
| ||
water. | CAP |
| CASE |
|
|
| |
|
| CAP |
|
FILTER CONTAINER |
|
|
|
4Clean the drain filter removing the foreign stuffs.
FILTER
CAP
5Put in the filter along the guiding prominence of the case. Please note the left position of the filter adjusting the groove to the guide rib.
CASE
FILTER
GUIDE
RIB
CAP
SLIT
6Turn the cap clockwise tightly.
CAP
CONVENIENCE 7