Electrolux 72640 Washing Machine Drum, Main door, Maintenance Wash, To run a maintenance wash

Page 30

Operating Instructions

7.Use a brush to clean the entire compartment area of the washing

machine, particularly also the nozzles on the top side of the compartment.

8.Set the detergent dispensing drawer into the guide tracks and push it in.

Washing Machine Drum

The washing machine drum is made from rust-free stainless steel. Any objects left in the laundry which are likely to rust can stain the drum.

Important! Do not clean the stainless steel drum with descaling agents containing acids, scouring agents containing chlorine or iron, or steel wool. Your local AEG Service Force Centre has suitable agents available.

0Remove any rust stains on the drum using a stainless steel cleaning agent.

	Maintenance Wash
3	With the use of low temperature washes it is possible to get a build up
	of residues inside the drum.
	We recommend that a maintenance wash be performed on a regular
	basis.

To run a maintenance wash:

The drum should be empty of laundry.

01. Select the hottest cotton wash programme.

2.Use a normal measure of detergent, must be a powder.

Main door

0Regularly check to see if there are deposits or foreign objects in the rubber seal behind the door, and remove them.

30

Image 30

Contents ÖKO-LAVAMAT 72640 update Future owners Dear CustomerPages of this instruction book ApplianceContents Installation and connection instructions Page Safety Prior to initial start-upIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDescription of the Appliance Front viewDetergent dispenser drawer Control panel Programme selectorMain wash cycle for delicates at 30 C or 40 C Wool P hand washWarm pre wash before the main washing cycle Ment products are only effective at higher temperaturesProgramme option buttons Shortened main wash cycle for lightly soiled washingWhat does Update mean? Consumption dataBefore the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Setting the Washing Programme Possible programme options to suit the type of washingChanging the spin speed/Selecting the rinse hold function Changing the spin speedSelecting the rinse hold function Setting the delay timer / soaking duration Delay timerSoaking duration See Programme Tables for maximum loads Opening and closing the doorLoading the washing Close the door firmlyCompartment for pre-wash/soaking detergent If using liquid detergent / tabletsAdd detergent / conditioner Or for water softening agentIf the delay timer has been set Starting the washing programmePressed, the door is not properly closed Washing Programme Progress Programme progress displayMulti-display Changing or cancelling the wash programme Changing the washing programmeSelecting the programme options Washing cycle is complete/Removing the washing Programme Tables WashingSeparate conditioning/starching Separate rinseSeparate spin Maintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Before cleaning the drain pumpTrouble Shooting What to do ifWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterAdditional Rinse RINSE+ When the water is completely drainedCancelling the additional rinse function To set the additional rinse functionWashing programme can be Child Safety FeatureCancelling the child safety feature StartedInstallation and connection instructions Installation Safety PrecautionsInstallation of the appliance Transporting the applianceRemove transport packaging Are supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceElectrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection TerferenceUser Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Warranty conditions Great BritainPage Index PNC Service & Spare Parts0870 5 929 Help us to help you Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG