Electrolux 72640 manual Inlet hose is leaking Connection

Problem

Possible Cause

Remedy

The screw connection on the

Tighten the inlet hose screw

inlet hose is leaking.

connection

The drainage hose is leaking.

Check the drainage hose and

replace it if necessary.

The washing drain pump

Close cover correctly.

cover is not correctly closed.

Water runs out from

Stop the programme and re-

Washing is caught in the

move the washing caught in

under the washing ma-

chine.

door.

the door. Restart the

programme.

Close the emergency empty-

ing hose correctly (see the

The emergency emptying

section "Carrying out Emer-

hose is not correctly closed

gency Emptying"). Call your

or is leaking.

local Service Force Centre if

the emergency emptying

hose leaks.

Fabric softener was not

The conditioner insert in the

Clean the detergent dis-

washed in, compart-

compartment for the condi-

penser drawer and attach the

ment æ for condition-

tioners is not correctly at-

conditioner insert securely.

ers is filled with water.

tached or is blocked.

Pay attention to the maxi-

Washing heavily

Probably too much washing

mum load quantity (see Pro-

gramme tables). In the case

creased

put in the drum.

of easy-care fabrics, select

the EASY IRON programme.

Drain hose is kinked.

Remove the kink.

The washing is not suf-

Contact your local Service

Maximum pump head (dis-

Force Centre. For pumping

ficiently spun. Water is

charge height 1m from the

heights over 1m a conver-

left in the drum.

appliance's base) is exceeded.

sion kit is available as a spe-

The fault code E20

cial accessory.

appears . The RINSE

display flashes.

Switch off the appliance and

Drain pump is blocked.

pull out the mains plug.

Clean the drain pump.