Electrolux 72640 manual Lights up green

Page 35

 

 

 

Operating Instructions

 

 

 

 

 

Problem

Possible Cause

Remedy

 

 

 

 

Wait until the DOOR display

 

 

 

 

lights up green.

 

 

 

 

If it is still necessary to open

 

 

 

The door is locked due to a

the door:

 

 

 

high water level or a high

turn the programme selector

 

 

 

temperature. (the DOOR dis-

to OFF turn the programme

 

 

 

play is off).

selector to DRAIN. Press the

 

 

 

 

START/PAUSE button

 

 

The door cannot be

 

After the water has been

 

 

 

pumped out, the door can be

 

 

opened when the ap-

 

 

 

 

opened.

 

 

pliance is switched on.

 

 

 

 

 

 

 

 

 

If water can be seen through

 

 

 

 

the window in the door, first

 

 

 

Power failure! (All displays

carry out emergency empty-

 

 

 

have gone off.)

ing (see section “Carrying out

 

 

 

For safety reasons the door

Emergency Emptying Opera-

 

 

 

remains locked for 4 to 10

tion").

 

 

 

minutes.

After approx. 4 to 10 minutes

 

 

 

 

the door can be opened

 

 

 

 

again by pulling the handle.

 

 

 

Water tap is not fully

Open the water tap fully.

 

 

Remnants of detergent

opened.

 

 

 

 

 

are building up in the

The inlet hose filter in the

Close the water tap. Unscrew

 

 

detergent dispenser

 

 

the inlet hose from the water

 

 

drawer.

coupling inlet hose at the

 

 

tap and from the appliance.

 

 

 

tap is blocked.

 

 

 

Clean the filter.

 

 

 

 

 

 

The rinsing water is

The cause is probably a de-

No negative effect on the

 

 

tergent with a high silicate

rinsing results, use a liquid

 

 

cloudy.

 

 

content.

detergent if necessary.

 

 

 

 

 

When pressing a pro-

The selected programme op-

 

 

 

gramme option button

 

 

 

tion cannot be combined

Make another selection.

 

 

the corresponding dis-

 

 

with the set programme.

 

 

 

play does not light up.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents
ÖKO-LAVAMAT 72640 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDetergent dispenser drawer Description of the ApplianceFront view Programme selector Control panelWool P hand wash Main wash cycle for delicates at 30 C or 40 CShortened main wash cycle for lightly soiled washing Ment products are only effective at higher temperaturesProgramme option buttons Warm pre wash before the main washing cycleConsumption data What does Update mean?Sorting and preparing a wash load Before the first washPreparing a Wash Load Washing Types and Care Symbols Water hardness details How much detergent and conditioner?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Possible programme options to suit the type of washing Setting the Washing ProgrammeSelecting the rinse hold function Changing the spin speed/Selecting the rinse hold functionChanging the spin speed Soaking duration Setting the delay timer / soaking durationDelay timer Close the door firmly Opening and closing the doorLoading the washing See Programme Tables for maximum loadsOr for water softening agent If using liquid detergent / tabletsAdd detergent / conditioner Compartment for pre-wash/soaking detergentPressed, the door is not properly closed If the delay timer has been setStarting the washing programme Multi-display Washing Programme ProgressProgramme progress display Selecting the programme options Changing or cancelling the wash programmeChanging the washing programme Washing cycle is complete/Removing the washing Washing Programme TablesSeparate spin Separate conditioning/starchingSeparate rinse Maintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingTo set the additional rinse function When the water is completely drainedCancelling the additional rinse function Additional Rinse RINSE+Started Child Safety FeatureCancelling the child safety feature Washing programme can beInstallation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceTransporting the appliance Cover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelEarth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed User Permanent ConnectionTerference Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Great Britain Warranty conditionsPage Index Customer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG