Electrolux 72640 manual Child Safety Feature, Washing programme can be, Started

Page 39

Operating Instructions

Child Safety Feature

 

If the child safety feature is set,

 

the door cannot be closed and no

 

washing programme can be

 

started.

 

Setting the child safety feature

0

Use a coin to turn the rotary knob

 

on the inside of the door clock-

 

wise as far as it will go.

1

Warning! The rotary knob must

 

not be in a vertical position after

adjustment, otherwise the child safety feature is not active. The ro- tary knob must project as shown in the diagram.

Cancelling the child safety feature

0Turn the rotary knob anticlockwise as far as it will go.

39

Image 39
Contents ÖKO-LAVAMAT 72640 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Safety Prior to initial start-upIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDescription of the Appliance Front viewDetergent dispenser drawer Programme selector Control panelWool P hand wash Main wash cycle for delicates at 30 C or 40 CShortened main wash cycle for lightly soiled washing Ment products are only effective at higher temperaturesProgramme option buttons Warm pre wash before the main washing cycleConsumption data What does Update mean?Before the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details When the washing programme has ended Running a washing cycleBrief instructions Possible programme options to suit the type of washing Setting the Washing ProgrammeChanging the spin speed/Selecting the rinse hold function Changing the spin speedSelecting the rinse hold function Setting the delay timer / soaking duration Delay timerSoaking duration Close the door firmly Opening and closing the doorLoading the washing See Programme Tables for maximum loadsOr for water softening agent If using liquid detergent / tabletsAdd detergent / conditioner Compartment for pre-wash/soaking detergentIf the delay timer has been set Starting the washing programmePressed, the door is not properly closed Washing Programme Progress Programme progress displayMulti-display Changing or cancelling the wash programme Changing the washing programmeSelecting the programme options Washing cycle is complete/Removing the washing Washing Programme TablesSeparate conditioning/starching Separate rinseSeparate spin Maintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingTo set the additional rinse function When the water is completely drainedCancelling the additional rinse function Additional Rinse RINSE+Started Child Safety FeatureCancelling the child safety feature Washing programme can beInstallation Safety Precautions Installation and connection instructionsInstallation of the appliance Transporting the applianceRemove transport packaging Cover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelElectrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection TerferenceUser Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Great Britain Warranty conditionsPage Index Customer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG