Electrolux 72640 manual Installation-Site preparation, Installation on a Suspended Floor

Page 43

Installation and connection instructions

Installation-Site preparation

•The installation surface must be clean, dry and level. Do not install on a deep pile carpet.

•Minor unevenness of the floor surface should never be levelled out by laying pieces of wood, card or similar materials, but should always be compensated for by adjusting the screw feet.

•If the appliance is installed next to a heat source (e.g. cooking appli- ance), a heat insulating pad (87 x 57 cm) must be placed between the appliance and the heat source.

•Do not install the appliance in locations where the temperature may fall below freezing.

•Please ensure that when the appliance is installed it is easily accessi- ble for the engineer in the event of a breakdown.

Installation on a Suspended Floor

Suspended wooden floors are particularly susceptible to vibration. To help prevent vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least

2 floor beams with screws. If possible install the appliance in one of the corners of the room, where the floor is more stable.

43

Image 43

Contents ÖKO-LAVAMAT 72640 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsFront view Description of the ApplianceDetergent dispenser drawer Programme selector Control panelWool P hand wash Main wash cycle for delicates at 30 C or 40 CShortened main wash cycle for lightly soiled washing Ment products are only effective at higher temperaturesProgramme option buttons Warm pre wash before the main washing cycleConsumption data What does Update mean?Preparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening How much detergent and conditioner?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Possible programme options to suit the type of washing Setting the Washing ProgrammeChanging the spin speed Changing the spin speed/Selecting the rinse hold functionSelecting the rinse hold function Delay timer Setting the delay timer / soaking durationSoaking duration Close the door firmly Opening and closing the doorLoading the washing See Programme Tables for maximum loadsOr for water softening agent If using liquid detergent / tabletsAdd detergent / conditioner Compartment for pre-wash/soaking detergentStarting the washing programme If the delay timer has been setPressed, the door is not properly closed Programme progress display Washing Programme ProgressMulti-display Changing the washing programme Changing or cancelling the wash programmeSelecting the programme options Washing cycle is complete/Removing the washing Washing Programme TablesSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingTo set the additional rinse function When the water is completely drainedCancelling the additional rinse function Additional Rinse RINSE+Started Child Safety FeatureCancelling the child safety feature Washing programme can beInstallation Safety Precautions Installation and connection instructionsTransporting the appliance Installation of the applianceRemove transport packaging Cover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionEarth Blue Neutral Brown Live Terference Permanent ConnectionUser Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataDimensions in mm Great Britain Warranty conditionsPage Index Customer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG