Electrolux 72640 manual Water tap is closed Open the water tap No water flows

Operating Instructions

Problem

Possible Cause

Remedy

Water tap is closed.

Open the water tap.

No water flows.

Close the water tap. Unscrew

Filter in screw connection of

the hose from the tap, re-

Fault code E10 ap-

the inlet hose is blocked.

move the filter and clean un-

pears. The display

der running water

RINSE + flashes

Water tap is blocked with

Check the water tap and

limescale or is faulty.

have it repaired if necessary.

The transport packaging has

Remove transport packaging

according to the installation

not been removed.

and connection instructions.

Adjust the feet according to

The machine is not level.

the installation and connec-

tion instructions.

The washing machine

There is very little washing in

This does not impair the op-

vibrates during opera-

tion or is unstable.

the drum (e.g. only one

eration of the machine.

dressing gown).

The water could not be com-

Check the the drain hose and

remove any kink if necessary,

pletely pumped out before

or clean the drain pump and,

spinning because the drain-

if required, remove foreign

age hose is kinked or the

bodies from the pump hous-

drain pump is blocked.

ing.

It may be necessary to re-

Excessive foaming dur-

Probably too much detergent

duce the amount of deter-

gent used. Follow the

ing the main wash.

was used.

detergent manufacturer's

recommendations.