Electrolux 72640 manual Water connection, Water pressure

Page 47

Installation and connection instructions

Water connection

3

The washing machine is provided with safety devices preventing back-

 

contamination of the water supply and complies with local water au-

thority requirements.

This appliance is designed to be permanently plumbed into your home’s water supply.

Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have collected in the pipes.

Important!

– Appliances for connecting to cold water must not be connected to hot water.

– Only use new hose sets for the connection.

Water pressure

The appliance is designed to operate within the following water pressure units. Minimum 1 bar (= 10N/cm2 = 0.1 Mpa), maximum 10 bar (= 100N/cm2 = 1 Mpa).

If more than 10 bar: Install a pressure-reduction valve upstream

If less than 1 bar: Unscrew the inlet hose from the appliance at the inlet solenoid valve and remove the flow regulator (to do this, remove the filter with needle nose pliers and remove the rubber washer be- hind the filter). Replace the filter.

47

Image 47
Contents ÖKO-LAVAMAT 72640 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDetergent dispenser drawer Description of the ApplianceFront view Programme selector Control panelWool P hand wash Main wash cycle for delicates at 30 C or 40 CShortened main wash cycle for lightly soiled washing Ment products are only effective at higher temperaturesProgramme option buttons Warm pre wash before the main washing cycleConsumption data What does Update mean?Sorting and preparing a wash load Before the first washPreparing a Wash Load Washing Types and Care Symbols Water hardness details How much detergent and conditioner?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Possible programme options to suit the type of washing Setting the Washing ProgrammeSelecting the rinse hold function Changing the spin speed/Selecting the rinse hold functionChanging the spin speed Soaking duration Setting the delay timer / soaking durationDelay timer Close the door firmly Opening and closing the doorLoading the washing See Programme Tables for maximum loadsOr for water softening agent If using liquid detergent / tabletsAdd detergent / conditioner Compartment for pre-wash/soaking detergentPressed, the door is not properly closed If the delay timer has been setStarting the washing programme Multi-display Washing Programme ProgressProgramme progress display Selecting the programme options Changing or cancelling the wash programmeChanging the washing programme Washing cycle is complete/Removing the washing Washing Programme TablesSeparate spin Separate conditioning/starchingSeparate rinse Maintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingTo set the additional rinse function When the water is completely drainedCancelling the additional rinse function Additional Rinse RINSE+Started Child Safety FeatureCancelling the child safety feature Washing programme can beInstallation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceTransporting the appliance Cover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelEarth Blue Neutral Brown Live Electrical ConnectionMeasures not be observed User Permanent ConnectionTerference Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions in mm Technical dataDimensions Great Britain Warranty conditionsPage Index Customer Care Service & Spare Parts0870 5 929 Help us to help you PNCAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG