Electrolux 76639 manual Setting the delay timer / soaking duration Delay timer, Soaking duration

Operating Instructions

Setting the delay timer / soaking duration

Delay timer

The DELAY TIMER button allows the start of a washing program to be delayed by 1 hour up to a maximum of 19 hours.

0 To do this, press the DELAY TIMER button repeatedly until the desired start delay is shown in the multi display, for example 12h for a 12 hour delay.

If 19h is displayed and you press again, 0h appears, followed by the duration time of the set program (displayed in minutes e. g.129). In this state the start delay timer is not set.

	Soaking duration
	When the SOAKING button is pressed, you can extend the soaking
	period with the DELAY TIMER button (maximum 10 hours and
	approx. 20 minutes).
3	Without DELAY TIMER, the soaking period is approximately 30 minutes,
	plus a pre-wash time of 20 minutes.

0To adjust, press the DELAY TIMER button as often as necessary until the required soaking period is shown in the multi display, e.g.1h (=1 hour).

After approximately 2 seconds, the multi display shows the duration in minutes.

	This duration time is made up as follows:
	Selected soaking period	e.g.	1h =60 Minutes
	+ Heating-up / pre-wash time	e.g.	Approx. 20	Minutes
	+ Duration of the selected wash program e.g.		Approx. 129	Minutes
	= Displayed value	e.g.	Approx. 209	Minutes
3	While SOAKING is running, PRE-WASH lights up on the program
	progress display.

19