Electrolux 76639 manual What to do if, Trouble Shooting, Problem Possible Cause Remedy

Page 30

Operating Instructions

What to do if...

Trouble Shooting

If the appliance is not working correctly, please carry out the following checks before contacting your local AEG Service Force Centre.

Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

• If the fault code E10, E20 or E40 is shown in

the multi-display, you may be able to remedy the fault yourself (see the Faults table below).

After clearing the fault, press the START/ PAUSE button. If the fault code is displayed again, contact your local AEG Service Force Centre.

•For all other faults displayed in the multi-display, please contact your local AEG Service Force Centre, stating the fault code.

	Problem	Possible Cause	Remedy
		The mains plug is not	Plug in the mains plug.
		plugged in.	Plug in the mains plug.
		plugged in.
		The house fuse has blown.	Replace the fuse.
	The washing machine	The door is not correctly	Close the door; The lock must
	does not work.	The door is not correctly	Close the door; The lock must
	does not work.	closed.	engage audibly.
		closed.	engage audibly.
		START/PAUSE button not	Keep the START/PAUSE but-
		START/PAUSE button not	ton pressed until the pro-
		pressed long enough.	ton pressed until the pro-
		pressed long enough.	gram begins.
			gram begins.

			Cancel the child safety fea-
	Door cannot be closed.	The child safety feature is set	ture (see Section "Child
			Safety Feature“).
	The fault code E40	The door is not correctly	Close the door correctly.
	appears. The display	The door is not correctly	Close the door correctly.
	appears. The display	closed.	Start the program again.
	MAIN WASH flashes.	closed.	Start the program again.
	MAIN WASH flashes.

	No water flows.	Water tap is closed.	Open the water tap.
	No water flows.		Close the water tap. Unscrew
	Fault code E10		Close the water tap. Unscrew
	appears. The display	Filter in screw connection of	the hose from the tap,
	appears. The display	the inlet hose is blocked.	remove the filter and clean
	RINSE + flashes	the inlet hose is blocked.	remove the filter and clean
	RINSE + flashes		under running water
			under running water

30

Image 30

Contents ÖKO-LAVAMAT 76639 update Dear Customer Contents Installation and connection instructions Installation Safety PrecautionsContents Safety Prior to initial start-upIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDescription of the Appliance Front viewDetergent dispenser drawer Control panel Program selectorWool P hand wash Program option buttons What does Update mean? Consumption data and wash timesLoad in kg Water Energy Time Before the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details Running a washing cycle Setting the Washing ProgramWhen the washing program has ended Brief instructionsIf you do not change the spin speed, the final spin Is automatically adjusted to suit the washing programChanging the spin speed/Selecting Rinse Hold WOOL/P hand washSetting the delay timer / soaking duration Delay timer Soaking durationLoading the washing Door Indicator Display START/PAUSEOpening and closing the door See Program Tables for maximum loadsCompartment for pre-wash/soaking detergent If using liquid detergent / tabletsAdd detergent / conditioner Or for water softening agentWashing Program Progress If the delay timer has been setStarting the washing program Pressed, the door is not properly closedChanging or stopping the wash program Change the washing programMulti-display Selecting the program optionsWashing cycle is complete/Removing the washing Electricity mainsProgram tables WashingSeparate rinse Type of washing Max. Load Program selector Dry weightSeparate conditioning/starching Separate spinMaintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorPump Cleaning the drain pumpBefore cleaning the drain pump Gency emptyingTrouble Shooting Problem Possible Cause RemedyWhat to do if Machine is not level Pay attention to the maxi If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterPull it out Cancelling the additional rinse function When the water is completely drainedSetting the additional rinse function Additional Rinse RINSE+Child Safety Feature Setting the child safety featureCancelling the child safety feature Installation and Connection Instructions Installation Safety PrecautionsInstallation of the appliance Transporting the applianceRemove transport packaging Installation and connection instructions Special spanner E Installation-Site preparation Installation on a Suspended FloorLevelling the appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Guarantee Conditions European GuaranteeGreat Britain Index PNC Service & Spare Parts0870 5 929 Help us to help you Customer Care