Electrolux 76639 manual Inlet Hose Connection

Page 45

Installation and connection instructions

Inlet Hose Connection

A pressure hose of 1.35m in length is supplied.

If a longer inflow hose is required, only a VDE-approved, complete set of hoses with fitted hose screw connections is permissible, available from AEG Service Force Centres.

–Hose sets in lengths of 2.2m, 3.5m, and 5m are available for washing machines without Aqua-Control.

–Hose sets in lengths of 2.0m, 2.9m and 3.9m are available for wash- ing machines with Aqua-Control.

Important! Never cut into pieces in order to extend the hoses!

3	Sealing rings are supplied either in the plastic
	nuts of the hose screw connection or in the

enclosed pack. Do not use other seals!

0 1. Connect the hose with the angled connection to the machine.

Important!

– Do not lay the inlet hose verti- cally downwards, instead run it to the right or left as shown in the diagram.

– Only tighten the hose screw connection by hand.

2. Connect the hose with the straight connection to a water tap with a screw thread R 3/4 (inches) Important! Only tighten the screw connection by hand.

3. By slowly opening the water tap before putting the washing machine into operation, check that the connection is free of leaks.

45

Image 45

Contents ÖKO-LAVAMAT 76639 update Dear Customer Contents Installation Safety Precautions Installation and connection instructionsContents Safety Prior to initial start-upIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Program selector Control panelWool P hand wash Program option buttons What does Update mean? Consumption data and wash timesLoad in kg Water Energy Time Before the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details When the washing program has ended Setting the Washing ProgramRunning a washing cycle Brief instructionsChanging the spin speed/Selecting Rinse Hold Is automatically adjusted to suit the washing programIf you do not change the spin speed, the final spin WOOL/P hand washSoaking duration Setting the delay timer / soaking duration Delay timerOpening and closing the door Door Indicator Display START/PAUSELoading the washing See Program Tables for maximum loadsAdd detergent / conditioner If using liquid detergent / tabletsCompartment for pre-wash/soaking detergent Or for water softening agentStarting the washing program If the delay timer has been setWashing Program Progress Pressed, the door is not properly closedMulti-display Change the washing programChanging or stopping the wash program Selecting the program optionsElectricity mains Washing cycle is complete/Removing the washingWashing Program tablesSeparate conditioning/starching Type of washing Max. Load Program selector Dry weightSeparate rinse Separate spinMaintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorBefore cleaning the drain pump Cleaning the drain pumpPump Gency emptyingTrouble Shooting Problem Possible Cause RemedyWhat to do if Machine is not level Pay attention to the maxi If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterPull it out Setting the additional rinse function When the water is completely drainedCancelling the additional rinse function Additional Rinse RINSE+Child Safety Feature Setting the child safety featureCancelling the child safety feature Installation Safety Precautions Installation and Connection InstructionsInstallation of the appliance Transporting the applianceRemove transport packaging Installation and connection instructions Special spanner E Installation on a Suspended Floor Installation-Site preparationLevelling the appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Disposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Guarantee Conditions European GuaranteeGreat Britain Index 0870 5 929 Help us to help you Service & Spare PartsPNC Customer Care