Electrolux 76639 manual Washing cycle is complete/Removing the washing, Electricity mains

Page 24

Operating Instructions

Washing cycle is complete/Removing the washing.

Once the washing program has come to an end, END illuminates on the program progress display.

If RINSE HOLD was selected, the display beside the START/ PAUSE button flashes.

0 1. After a rinse hold, the water must first be pumped out:

–Either press the START/PAUSE button (the water is pumped out and the washing is spun according to the completed program; After the START/PAUSE button is pressed again, the spin speed can still also be changed during spinning),

or

–Turn the program selector to PUMP OUT and press the START/PAUSE button (the water is pumped out without spinning),

or

–Turn the program selector to SPIN or SHORT SPIN and press the

START/PAUSE button (the water is pumped out and the washing is spun or gently spun).

At the end of this program step, the END indicator will illuminate.

2.Open the door.

As soon as the DOOR indicator lights up green, the door can be opened.

3.Remove the washing.

4.Turn the program selector to OFF.

5.Close the water tap.

6.After washing, pull out the washing detergent dispenser drawer slightly so that it can dry out. Leave the door ajar so that air can circulate in the drum.

3	If the OVERDOSING indicator illuminates, then too

	much detergent was used in the washing program
	just completed. Observe the dosing recommendations
	of the detergent manufacturer as well as the load
	quantity for the next wash.
	Important! If the washing machine is not to be used for a long period:
	Close the water tap and disconnect the washing machine from the
	electricity mains.

24

Image 24

Contents ÖKO-LAVAMAT 76639 update Dear Customer Contents Installation and connection instructions Installation Safety PrecautionsContents Safety Prior to initial start-upIntended Use Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Control panel Program selectorWool P hand wash Program option buttons What does Update mean? Consumption data and wash timesLoad in kg Water Energy Time Before the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details Setting the Washing Program When the washing program has endedRunning a washing cycle Brief instructionsIs automatically adjusted to suit the washing program Changing the spin speed/Selecting Rinse HoldIf you do not change the spin speed, the final spin WOOL/P hand washSetting the delay timer / soaking duration Delay timer Soaking durationDoor Indicator Display START/PAUSE Opening and closing the doorLoading the washing See Program Tables for maximum loadsIf using liquid detergent / tablets Add detergent / conditionerCompartment for pre-wash/soaking detergent Or for water softening agentIf the delay timer has been set Starting the washing programWashing Program Progress Pressed, the door is not properly closedChange the washing program Multi-displayChanging or stopping the wash program Selecting the program optionsWashing cycle is complete/Removing the washing Electricity mainsProgram tables WashingType of washing Max. Load Program selector Dry weight Separate conditioning/starchingSeparate rinse Separate spinMaintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorCleaning the drain pump Before cleaning the drain pumpPump Gency emptyingTrouble Shooting Problem Possible Cause RemedyWhat to do if Machine is not level Pay attention to the maxi If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterPull it out When the water is completely drained Setting the additional rinse functionCancelling the additional rinse function Additional Rinse RINSE+Child Safety Feature Setting the child safety featureCancelling the child safety feature Installation and Connection Instructions Installation Safety PrecautionsInstallation of the appliance Transporting the applianceRemove transport packaging Installation and connection instructions Special spanner E Installation-Site preparation Installation on a Suspended FloorLevelling the appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Permanent Connection Disposed of safelyWater connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Guarantee Conditions European GuaranteeGreat Britain Index Service & Spare Parts 0870 5 929 Help us to help youPNC Customer Care