Electrolux 76639 manual Machine is not level

		Operating Instructions
Problem	Possible Cause	Remedy
		Adjust the feet according to
	The machine is not level.	the installation and connec-
		tion instructions.
	There is very little washing in	This does not impair the
	the drum (e.g. only one
The washing machine		operation of the machine.
	dressing gown).
vibrates during opera-
tion or is unstable.	The water could not be com-	Check the the drain hose and
		remove any kink if necessary,
	pletely pumped out before	or clean the drain pump and,
	spinning because the drain-
		if required, remove foreign
	age hose is kinked or the
		bodies from the pump hous-
	drain pump is blocked.
		ing.
		It may be necessary to
Excessive foaming dur-	Probably too much detergent	reduce the amount of deter-
		gent used. Follow the deter-
ing the main wash.	was used.
		gent manufacturer's
		recommendations.
	The screw connection on the	Tighten the inlet hose screw
	inlet hose is leaking.	connection
	The drainage hose is leaking.	Check the drainage hose and
		replace it if necessary.
	The washing drain pump	Close cover correctly.
	cover is not correctly closed.
Water runs out from		Stop the program and
	Washing is caught in the	remove the washing caught
under the washing
	door.	in the door. Restart the
machine.
		program.
		Close the emergency empty-
		ing hose correctly (see the
	The emergency emptying	section "Carrying out Emer-
	hose is not correctly closed	gency Emptying"). Call your
	or is leaking.	local Service Force Centre if
		the emergency emptying
		hose leaks.
Fabric softener was not	The conditioner insert in the	Clean the detergent dis-
washed in, compart-	compartment for the condi-
		penser drawer and attach the
ment æ for condition-	tioners is not correctly
		conditioner insert securely.
ers is filled with water.	attached or is blocked.

31