Electrolux 76639 manual If the washing results are not satisfactory

Page 33

 

 

 

Operating Instructions

 

 

 

 

 

 

Problem

Possible Cause

Remedy

 

 

The rinsing water is

The cause is probably a

No negative effect on the

 

 

detergent with a high silicate

rinsing results, use a liquid

 

 

cloudy.

 

 

content.

detergent if necessary.

 

 

 

 

 

When pressing a pro-

The selected program option

 

 

 

gram option button

 

 

 

cannot be combined with the

Make another selection.

 

 

the corresponding dis-

 

 

set program.

 

 

 

play does not light up.

 

 

 

 

 

 

 

 

 

 

 

If the washing results are not satisfactory

If the washing turns greyish and limescale deposits are present in the drum

Insufficient detergent has been added.

Incorrect detergent was used.

Stains were not pre-treated.

Program or temperature was not set correctly.

If using modular detergents, the individual components were not used in the correct ratio.

If there are still grey stains on the washing

Soiled garments with ointments, grease or oils were washed with insufficient detergent.

The temperature selected for the wash was too low.

A frequent cause is that fabric softener - particularly a concentrated one - has come into contact with the washing. Wash out these types of stains as soon as possible and use the fabric softener carefully.

If after the last rinse foam is still visible

Modern detergents can still cause foam in the final rinse cycle. How- ever, the washing is still sufficiently rinsed.

If there are white residues on the washing

These are insoluble contents of modern detergents. They are not the result of an insufficient rinse. Shake out the washing or brush it off. Turn the washing inside out before washing it. Review your choice of detergent and if necessary use liquid detergent.

33

Image 33
Contents ÖKO-LAVAMAT 76639 update Dear Customer Contents Installation Safety Precautions Installation and connection instructionsContents Safety Prior to initial start-upIntended Use General Safety Child SafetyDisposal When disposing of the washing machineEnvironmental tips PackagingDescription of the Appliance Front viewDetergent dispenser drawer Program selector Control panelWool P hand wash Program option buttons What does Update mean? Consumption data and wash timesLoad in kg Water Energy Time Before the first wash Preparing a Wash LoadSorting and preparing a wash load Washing Types and Care Symbols How much detergent and conditioner? Water softeningWater hardness details When the washing program has ended Setting the Washing ProgramRunning a washing cycle Brief instructionsChanging the spin speed/Selecting Rinse Hold Is automatically adjusted to suit the washing programIf you do not change the spin speed, the final spin WOOL/P hand washSoaking duration Setting the delay timer / soaking duration Delay timerOpening and closing the door Door Indicator Display START/PAUSELoading the washing See Program Tables for maximum loadsAdd detergent / conditioner If using liquid detergent / tabletsCompartment for pre-wash/soaking detergent Or for water softening agentStarting the washing program If the delay timer has been setWashing Program Progress Pressed, the door is not properly closedMulti-display Change the washing programChanging or stopping the wash program Selecting the program optionsElectricity mains Washing cycle is complete/Removing the washingWashing Program tablesSeparate conditioning/starching Type of washing Max. Load Program selector Dry weightSeparate rinse Separate spinMaintenance and Cleaning To run a maintenance wash Maintenance WashWashing Machine Drum Main doorBefore cleaning the drain pump Cleaning the drain pumpPump Gency emptyingTrouble Shooting Problem Possible Cause RemedyWhat to do if Machine is not level Pay attention to the maxi If there are still grey stains on the washing If the washing results are not satisfactoryIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterPull it out Setting the additional rinse function When the water is completely drainedCancelling the additional rinse function Additional Rinse RINSE+Child Safety Feature Setting the child safety featureCancelling the child safety feature Installation Safety Precautions Installation and Connection InstructionsInstallation of the appliance Transporting the applianceRemove transport packaging Installation and connection instructions Special spanner E Installation on a Suspended Floor Installation-Site preparationLevelling the appliance Electrical Connection Measures not be observedEarth Blue Neutral Brown Live Disposed of safely Permanent ConnectionWater pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsDimensions in mm Guarantee Conditions European GuaranteeGreat Britain Index 0870 5 929 Help us to help you Service & Spare PartsPNC Customer Care