Electrolux W 1450 manual Opening and closing the door, Loading the washing

Page 18

Operating Instructions

Opening and closing the door

0To open: pull the door by the handle.

0To close: push the door firmly shut.

When the machine is switched on, the DOOR light and the START/ PAUSE light indicate whether the door can be opened

DOOR indicator

START/PAUSE indicator

Can the door be opened?

flashes

flashes

yes, after about 2 minutes

lit

lit

no1)

is off

flashes

yes

 

 

 

1) Door is locked due to high water level or high temperature.

3

If the END light flashes 4 times and an acoustic signal is emitted 4

 

times, it means there was an attempt to start a wash programme with-

 

out closing the door properly. If this happens, push the door firmly shut

 

and start the wash programme again.

Loading the washing

3

See "Programme Tables" for maximum loads.

 

For information about the correct preparation of the washing see "Sort

and prepare washing".

01. Sort and prepare the washing according to type.

2.Open the door: Pull the handle on the door.

3. Load the washing.

Important! Do not trap washing when closing the door. The fabrics and the ma- chine could be damaged.

4. Close the door firmly.

18

Image 18
Contents Lavamat W 1450 Electronic Dear Customer Contents Trouble Shooting What to do ifPage Safety Prior to initial start-upIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDescription of the Appliance Front viewDrawer for Detergent and Conditioners Control Panel Programme selectorEASY-CARES WOOL/SILK P HandwashProgramme Option Buttons PRE-WASHConsumption Values and Programme Times Load Water Energy TimeBefore the First Wash Preparing a Wash LoadSorting and preparing a wash load Types of Washing and Care Symbols Quantities of detergent and conditioners? Water softeningWater hardness details Running a washing cycle Brief instructionsAfter the washing programme has ended Opening and closing the door Loading the washingIf using liquid detergents/tablets Adding detergent/conditionersSetting the washing programme Changing Spin Speed/selecting Rinse HoldStarting the Wash Programme Programme ProgressChanging the washing programme Washing cycle complete/removing the washing Changing the Spin SpeedProgramme Tables WashingSeparate Rinsing Separate SpinningMaintenance and Cleaning Detergent Dispenser DrawerWashing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Operating Instructions Trouble Shooting What to do ifMoved START/PAUSE Water tap is not fully Open the water tap fully If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Additional rinse cycles RINSE+ When the water is completely drainedTo cancel the additional rinse cycles To set the additional rinse cyclesChild Safety Feature Setting the child safety featureCancelling the child safety Feature Installation and connection instructions Installation Safety PrecautionsInstallation of the appliance Transporting the applianceRemove transport packaging Are supplied with it Installation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceElectrical Connection Measures not be observedPermanent Connection Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsWarranty conditions Great BritainIndex Service & Spare Parts 0870 5 929 Help us to help youCustomer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG