Electrolux W 1450 manual Carrying out an emergency emptying

Page 34

Operating Instructions

Carrying out an emergency emptying

If the washing machine no longer pumps out the water, emergency emptying must be carried out.

If the washing machine is located in a room in which below freezing temperatures might occur, emergency emptying must be carried out. Furthermore: unscrew the inlet hose from the water tap and drain off the water. Empty the drainage hose.

1Warning! Switch off the washing machine and pull out the mains plug prior to performing emergency emptying.

Warning! The water, which flows out of the emergency emptying hose can be hot. First allow the water to cool down before you carry out the emergency emptying.

01. Have a flat container on hand to catch the water.

2. Pull down the flap in the right corner of the base strip outwards and pull it off.

3. Remove the emergency emptying hose from its holder.

4. Place the container under the hose.

5. Detach the plug of the emergency emp- tying hose by turning it anticlockwise and pull it out.

The water runs out. Depending on the amount of water, it may be necessary to empty the collecting vessel several

times. To do this, close the emergency emptying hose temporarily with the plug.

Discard the water from the container, replace it under the emergency emptying hose and remove the plug from the hose.

34

Image 34
Contents Lavamat W 1450 Electronic Dear Customer Contents Trouble Shooting What to do ifPage Prior to initial start-up SafetyIntended Use Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingFront view Description of the ApplianceDrawer for Detergent and Conditioners Control Panel Programme selectorEASY-CARES WOOL/SILK P HandwashProgramme Option Buttons PRE-WASHConsumption Values and Programme Times Load Water Energy TimePreparing a Wash Load Before the First WashSorting and preparing a wash load Types of Washing and Care Symbols Water softening Quantities of detergent and conditioners?Water hardness details Brief instructions Running a washing cycleAfter the washing programme has ended Opening and closing the door Loading the washingIf using liquid detergents/tablets Adding detergent/conditionersSetting the washing programme Changing Spin Speed/selecting Rinse HoldProgramme Progress Starting the Wash ProgrammeChanging the washing programme Washing cycle complete/removing the washing Changing the Spin SpeedProgramme Tables WashingSeparate Rinsing Separate SpinningMaintenance and Cleaning Detergent Dispenser DrawerWashing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Operating Instructions Trouble Shooting What to do ifMoved START/PAUSE Water tap is not fully Open the water tap fully If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Additional rinse cycles RINSE+ When the water is completely drainedTo cancel the additional rinse cycles To set the additional rinse cyclesSetting the child safety feature Child Safety FeatureCancelling the child safety Feature Installation and connection instructions Installation Safety PrecautionsTransporting the appliance Installation of the applianceRemove transport packaging Are supplied with it Installation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceElectrical Connection Measures not be observedPermanent Connection Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsWarranty conditions Great BritainIndex 0870 5 929 Help us to help you Service & Spare PartsCustomer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG