Electrolux W 1450 Washing Machine Drum, Main door, Maintenance Wash, To run a maintenance wash

Page 26

Operating Instructions

7.Use a brush to clean the entire compartment area of the washing

machine, particularly also the nozzles on the top side of the compartment.

8.Set the detergent dispensing drawer into the guide tracks and push it in.

Washing Machine Drum

The washing machine drum is made from rust-free stainless steel. Any objects left in the laundry which are likely to rust can stain the drum.

Important! Do not clean the stainless steel drum with descaling agents containing acids, scouring agents containing chlorine or iron, or steel wool. Your local AEG Service Force Centre has suitable agents available.

0Remove any rust stains on the drum using a stainless steel cleaning agent.

 

Maintenance Wash

3

With the use of low temperature washes it is possible to get a build up

 

of residues inside the drum.

 

We recommend that a maintenance wash be performed on a regular

 

basis.

To run a maintenance wash:

The drum should be empty of laundry.

01. Select the hottest cotton wash programme.

2.Use a normal measure of detergent, must be a powder.

Main door

0Regularly check to see if there are deposits or foreign objects in the rubber seal behind the door, and remove them.

26

Image 26
Contents Lavamat W 1450 Electronic Dear Customer Contents Trouble Shooting What to do ifPage Intended Use SafetyPrior to initial start-up Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDrawer for Detergent and Conditioners Description of the ApplianceFront view Control Panel Programme selectorEASY-CARES WOOL/SILK P HandwashProgramme Option Buttons PRE-WASHConsumption Values and Programme Times Load Water Energy TimeSorting and preparing a wash load Before the First WashPreparing a Wash Load Types of Washing and Care Symbols Water hardness details Quantities of detergent and conditioners?Water softening After the washing programme has ended Running a washing cycleBrief instructions Opening and closing the door Loading the washingIf using liquid detergents/tablets Adding detergent/conditionersSetting the washing programme Changing Spin Speed/selecting Rinse HoldChanging the washing programme Starting the Wash ProgrammeProgramme Progress Washing cycle complete/removing the washing Changing the Spin SpeedProgramme Tables WashingSeparate Rinsing Separate SpinningMaintenance and Cleaning Detergent Dispenser DrawerWashing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Operating Instructions Trouble Shooting What to do ifMoved START/PAUSE Water tap is not fully Open the water tap fully If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Additional rinse cycles RINSE+ When the water is completely drainedTo cancel the additional rinse cycles To set the additional rinse cyclesCancelling the child safety Feature Child Safety FeatureSetting the child safety feature Installation and connection instructions Installation Safety PrecautionsRemove transport packaging Installation of the applianceTransporting the appliance Are supplied with it Installation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceElectrical Connection Measures not be observedPermanent Connection Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsWarranty conditions Great BritainIndex Customer Care Service & Spare Parts0870 5 929 Help us to help you AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG