Electrolux W 1450 manual Programme Tables, Washing

Page 23

Operating Instructions

Programme Tables

Washing

The tables do not show all the possible settings, only those most likely to be selected for everyday purposes.

	Type of washing,	Max. Load1)	Programme selector	Possible
				programme
	Care symbol	(Dry weight)2)	Temperature [in °C]
				options

	Cottons		COTTONS/LINEN	PRE-WASH
		5kg		or STAIN
	ç		95
				QUICK

	Cottons/Coloureds3)	5kg	ENERGY SAVING	PRE-WASH
	èç			or STAIN

	Coloureds		COTTONS/LINEN	PRE-WASH
		5kg		or STAIN4)
	èë		30 to 60
				QUICK


		2.5kg	EASY-CARES	PRE-WASH
	Easy-cares		50, 60

				or STAIN
	êí		EASY IRON5)
		1kg		QUICK
			40


	Delicates	2.5kg	DELICATES	PRE-WASH
		(or 15-20m2
	ì		30, 40	QUICK
		net curtains)

	Wool/Silk (Handwash)		P
		2kg	WOOL/SILK
	9ìï
			COLD, 30

1)The load amount inquiry operates in accordance with the EN 60456 standard load.

2)A 10 litre bucket holds around 2.5 kg of dry clothes (cotton).

3)Programme settings for testing in accordance with or in support of EN 60 456 and IEC 60 456 are described in the chapter "Consumption Values and Pro- gramme Times“.

4)A temperature of at least 40 °C is needed for the STAIN programme, to make stain treatment products effective.

5)Creasing can largely be avoided, but only by keeping wash loads under 1 kg, About 1 kg of dry clothes is equivalent to between 5 and 7 easy-care men's shirts.

23

Image 23

Contents Lavamat W 1450 Electronic Dear Customer Contents What to do if Trouble ShootingPage Intended Use SafetyPrior to initial start-up General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDrawer for Detergent and Conditioners Description of the ApplianceFront view Programme selector Control PanelWOOL/SILK P Handwash EASY-CARESPRE-WASH Programme Option ButtonsLoad Water Energy Time Consumption Values and Programme TimesSorting and preparing a wash load Before the First WashPreparing a Wash Load Types of Washing and Care Symbols Water hardness details Quantities of detergent and conditioners?Water softening After the washing programme has ended Running a washing cycleBrief instructions Loading the washing Opening and closing the doorAdding detergent/conditioners If using liquid detergents/tabletsChanging Spin Speed/selecting Rinse Hold Setting the washing programmeChanging the washing programme Starting the Wash ProgrammeProgramme Progress Changing the Spin Speed Washing cycle complete/removing the washingWashing Programme TablesSeparate Spinning Separate RinsingDetergent Dispenser Drawer Maintenance and CleaningMain door Maintenance WashTo run a maintenance wash Washing Machine DrumCleaning the drain pump Operating Instructions What to do if Trouble ShootingMoved START/PAUSE Water tap is not fully Open the water tap fully If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleCarrying out an emergency emptying To set the additional rinse cycles When the water is completely drainedTo cancel the additional rinse cycles Additional rinse cycles RINSE+Cancelling the child safety Feature Child Safety FeatureSetting the child safety feature Installation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceTransporting the appliance Are supplied with it Installation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionPermanent Connection Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataGreat Britain Warranty conditionsIndex Customer Care Service & Spare Parts0870 5 929 Help us to help you AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG