Electrolux W 1450 manual Cleaning the drain pump

Page 27

Operating Instructions

Cleaning the drain pump

 

Paper clips, nails and so on can sometimes get into the washing ma-

 

chine with the washing and remain in the drain pump casing. Fluff and

 

strands of fabric can gather on these items and block the drain pump.

 

Therefore the drain pump should be cleaned at least once a year.

1

Warning! Switch off the washing machine and pull out the mains plug

 

before cleaning the drain pump!

01. First carry out emergency emptying (see section "Carrying out emer- gency emptying").

2.Place a towel on the floor in front of the cover of the drain pump. Re- sidual water can run out.

3. Unscrew the drain pump cover anti- clockwise and pull it out.

4. Remove any foreign objects, fluff and strands of fabric from the drain pump.

5.Check that you are able to turn the

pump wheel at the very rear of the pump housing. (If the wheel rotates with a jerky motion, this is normal.) If you cannot turn the pump wheel, con- tact customer service.

27

Image 27
Contents Lavamat W 1450 Electronic Dear Customer Contents What to do if Trouble ShootingPage Safety Prior to initial start-upIntended Use General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDescription of the Appliance Front viewDrawer for Detergent and Conditioners Programme selector Control PanelWOOL/SILK P Handwash EASY-CARESPRE-WASH Programme Option ButtonsLoad Water Energy Time Consumption Values and Programme TimesBefore the First Wash Preparing a Wash LoadSorting and preparing a wash load Types of Washing and Care Symbols Quantities of detergent and conditioners? Water softeningWater hardness details Running a washing cycle Brief instructionsAfter the washing programme has ended Loading the washing Opening and closing the doorAdding detergent/conditioners If using liquid detergents/tabletsChanging Spin Speed/selecting Rinse Hold Setting the washing programmeStarting the Wash Programme Programme ProgressChanging the washing programme Changing the Spin Speed Washing cycle complete/removing the washingWashing Programme TablesSeparate Spinning Separate RinsingDetergent Dispenser Drawer Maintenance and CleaningMain door Maintenance WashTo run a maintenance wash Washing Machine DrumCleaning the drain pump Operating Instructions What to do if Trouble ShootingMoved START/PAUSE Water tap is not fully Open the water tap fully If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleCarrying out an emergency emptying To set the additional rinse cycles When the water is completely drainedTo cancel the additional rinse cycles Additional rinse cycles RINSE+Child Safety Feature Setting the child safety featureCancelling the child safety Feature Installation Safety Precautions Installation and connection instructionsInstallation of the appliance Transporting the applianceRemove transport packaging Are supplied with it Installation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionPermanent Connection Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataGreat Britain Warranty conditionsIndex Service & Spare Parts 0870 5 929 Help us to help youCustomer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG