Electrolux W 1450 manual Additional rinse cycles RINSE+, When the water is completely drained

Page 35

Operating Instructions

When the water is completely drained:

6.Push the plug securely into the emergency emptying hose and turn it clockwise to secure it.

7.Replace the emergency emptying hose in its holder.

8.Put on the flap and close.

Additional rinse cycles (RINSE+)

 

The washing machine is set for very economical water consumption.

 

However, people who suffer from allergies to detergents, it can be

 

helpful to rinse with extra water.

3

If RINSE+ is selected, two extra rinses are added to the COTTONS/LINEN,

 

EASY-CARES, EASY IRON, and DELICATES programmes.

When delivered, the machine is not set for additional rinses.

To set the additional rinse cycles:

01. Turn the programme selector to COTTONS/LINEN, EASY-CARES/ EASY IRON or DELICATES (any temperature).

2.Press and hold PRE WASH and QUICK at the same time for at least

2 seconds. On the programme progress display the RINSE and RINSE+ lights come on. The additional rinse cycles are set. It remains set until cancelled again.

3

The additional rinse cycles raise water consumption and extend pro-

 

gramme times.

To cancel the additional rinse cycles

01. Turn the programme selector to COTTONS/LINEN, EASY-CARES/ EASY IRON or DELICATES again.

2.Press and hold PRE WASH and QUICK at the same time for at least 2 seconds. RINSE+ goes off on the programme progress display. The additional rinse cycles are cancelled.

35

Image 35
Contents Lavamat W 1450 Electronic Dear Customer Contents What to do if Trouble ShootingPage Intended Use SafetyPrior to initial start-up General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDrawer for Detergent and Conditioners Description of the ApplianceFront view Programme selector Control PanelWOOL/SILK P Handwash EASY-CARESPRE-WASH Programme Option ButtonsLoad Water Energy Time Consumption Values and Programme TimesSorting and preparing a wash load Before the First WashPreparing a Wash Load Types of Washing and Care Symbols Water hardness details Quantities of detergent and conditioners?Water softening After the washing programme has ended Running a washing cycleBrief instructions Loading the washing Opening and closing the doorAdding detergent/conditioners If using liquid detergents/tabletsChanging Spin Speed/selecting Rinse Hold Setting the washing programmeChanging the washing programme Starting the Wash ProgrammeProgramme Progress Changing the Spin Speed Washing cycle complete/removing the washingWashing Programme TablesSeparate Spinning Separate RinsingDetergent Dispenser Drawer Maintenance and CleaningMain door Maintenance WashTo run a maintenance wash Washing Machine DrumCleaning the drain pump Operating Instructions What to do if Trouble ShootingMoved START/PAUSE Water tap is not fully Open the water tap fully If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleCarrying out an emergency emptying To set the additional rinse cycles When the water is completely drainedTo cancel the additional rinse cycles Additional rinse cycles RINSE+Cancelling the child safety Feature Child Safety FeatureSetting the child safety feature Installation Safety Precautions Installation and connection instructionsRemove transport packaging Installation of the applianceTransporting the appliance Are supplied with it Installation on a Suspended Floor Installation-Site preparationLevelling the Appliance Check that the appliance is level using a spirit levelMeasures not be observed Electrical ConnectionPermanent Connection Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Dimensions Technical dataGreat Britain Warranty conditionsIndex Customer Care Service & Spare Parts0870 5 929 Help us to help you AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG