Electrolux W 1450 Disposal, Environmental tips, Packaging, When disposing of the washing machine

Page 8

Operating Instructions

2Disposal

Packaging

Dispose of the packaging material correctly. All packaging materials used are environmentally friendly and can be disposed of without any danger to the environment.

Plastic parts can be recycled and are identified as follows:

>PE<

for polyethylene, e.g. the outer covering and the bags in

the interior.

 

>PS<

for polystyrene, e.g. padding (always CFC-free)

>POM<

for polyoxymethylene, e.g. plastic clips

Cardboard packaging is manufactured from recycled paper and should be deposited in the waste paper collection for recycling.

When disposing of the washing machine!

Cut off the mains cable and destroy the plug. Disable the door catch to prevent young children becoming trapped inside. Use an authorised disposal site.

2Environmental tips

To save water and energy, and to help protect the environment, we rec- ommend that you follow these tips.

Do not use a pre-wash for normally soiled washing.

It is more economical to wash full loads.

When washing small loads, reduce the detergent by half to two thirds.

Pre-treat stains, and then wash at a lower temperature.

Use the energy-saving programme when washing light to normally soiled garments.

In hard water areas, the use of a water softening agent can reduce the amount of detergent necessary. See manufacturers recommen- dations.

8

Image 8
Contents Lavamat W 1450 Electronic Dear Customer Contents Trouble Shooting What to do ifPage Intended Use SafetyPrior to initial start-up Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingDrawer for Detergent and Conditioners Description of the ApplianceFront view Control Panel Programme selectorEASY-CARES WOOL/SILK P HandwashProgramme Option Buttons PRE-WASHConsumption Values and Programme Times Load Water Energy TimeSorting and preparing a wash load Before the First WashPreparing a Wash Load Types of Washing and Care Symbols Water hardness details Quantities of detergent and conditioners?Water softening After the washing programme has ended Running a washing cycleBrief instructions Opening and closing the door Loading the washingIf using liquid detergents/tablets Adding detergent/conditionersSetting the washing programme Changing Spin Speed/selecting Rinse HoldChanging the washing programme Starting the Wash ProgrammeProgramme Progress Washing cycle complete/removing the washing Changing the Spin SpeedProgramme Tables WashingSeparate Rinsing Separate SpinningMaintenance and Cleaning Detergent Dispenser DrawerMaintenance Wash To run a maintenance washWashing Machine Drum Main doorCleaning the drain pump Operating Instructions Trouble Shooting What to do ifMoved START/PAUSE Water tap is not fully Open the water tap fully If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying When the water is completely drained To cancel the additional rinse cyclesAdditional rinse cycles RINSE+ To set the additional rinse cyclesCancelling the child safety Feature Child Safety FeatureSetting the child safety feature Installation and connection instructions Installation Safety PrecautionsRemove transport packaging Installation of the applianceTransporting the appliance Are supplied with it Installation-Site preparation Installation on a Suspended FloorCheck that the appliance is level using a spirit level Levelling the ApplianceElectrical Connection Measures not be observedPermanent Connection Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Technical data DimensionsWarranty conditions Great BritainIndex Customer Care Service & Spare Parts0870 5 929 Help us to help you AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG