Electrolux LAVAMAT 86810 manual Changing spin speed/selecting rinse hold

Page 14

Changing the temperature

Press the TEMP. key repeat- edly until the desired tem- perature is

displayed.

LINEN/EASY CARE	12.45
Cycle end at	14.37

50C1600 aýýýýýaýaýaýaýaýaýaýaýa

TEMP.

RPM

OPTIONS

TIME

Changing spin speed/selecting rinse hold

Press the RPM key repeated- ly, until the desired spin

speed or RINSE HOLD is displayed.

LINEN/EASY CARE	12.45
Cycle end at	14.37

50C 800 aýýýýýaýaýaýaýaýaýaýaýa

3 • With spin speed “0” the TEMP. RPM OPTIONS OK TIME

last rinse water is drained off at the end of the cycle, but the washing is not spun.

•With RINSE HOLD the washing is left to soak in the last rinse wa- ter. There is no final spin after the intermediate spin(s). Intermediate spins are programme-dependent and cannot be altered.

Image 14

Contents Lavamat Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety information concerning installationChild safety SafetyPrior to using the appliance for the first time Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardWhat is shown in the display Cycle end atProgram overview Easy IronUse/Features Care Symbols1 R a c h e Prior to using for the first timeN g u a g e Programmende umCarrying out a wash programme prior to first use Setting the timePreparing and sorting washing Preparing washingWashing powder/tablets for the main wash cycle Running a wash cycleAdding detergent/conditioner Switching on the appliance/selecting a program If you are using liquid detergentWith spin speed 0 the TEMP. RPM Options OK Time Changing spin speed/selecting rinse holdSpeed or Rinse Hold is displayed Current load display goes out if the door is closed Max . loadOpening the door/Loading the washing Setting options SensitivePrewash, Sensitive, Stain, Night Cycle PrewashingSensitive Time saving Setting timesDelay Start Time Saving Short or Very ShortStart Delay StartStart in 4h Starting a programmeInterrupting a programme/Adding washing WashingProgramme progress Interrupting a programmeMemory 1, 2 SetupWashing cycle complete/Removing the washing If Rinse Hold or Night Cycle was selectedChanging the Memory Setting the MemoryMemory Store program N s e + VolumeU n d Extra RinseClock Set timeLanguage Each press of the key or if Desired setting. WithContrast and brightness Child safety device Deactivating the child safety deviceDetergent dispenser drawer Cleaning and maintenanceCleaning procedure Washing drumDoor and rubber collar Clean the glass in the door and the rubber collar regularlyWhat to do if Remedying small malfunctionsTap turned off Turn the tap on Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washingWhen the water has all drained away Carrying out an emergency drainDrain pump Old appliance DisposalPackaging material Technical data Consumption valuesSafety information concerning installation This washing machine cannot be built-inTransporting the appliance Installing the applianceWhen using a sack trolley to transport the washing machine Removing the transport lockAppliance Where to installRemove both plastic caps sideways Making the appliance level If the appliance is to stand on a basePermanent Connection Brown Live Wire coloured green and yellowElectrical Connection Connecting the appliance to the water supply Permitted water pressureWater inlet 35m long pressure hose is supplied with the applianceFor drainage into an outlet From your Service Force CentreWater Drainage Pumping heights of over 1 metre Guarantee/Customer Service Great BritainEuropean Guarantee LU4 9QQMagyarország +36 For general enquiries concerning 0870 5 929Customer Care Major Appliances105 176 Subject to change without notice

LINEN/EASY CARE

Cycle end at

Changing spin speed/selecting rinse hold

speed or RINSE HOLD is displayed.

Cycle end at

3 • With spin speed “0” the TEMP. RPM OPTIONS OK TIME