Electrolux LAVAMAT 86810 Time saving, Setting times, Time Saving Short or Very Short, Delay Start

Page 18

Setting times

Shortened cycles and the delay of the start time can be set for a wash cycle that has already been selected.

Press the TIME key. The display shows the symbols for Time Saving and Delay Start.

Time Saving: SHORT or VERY SHORT

Shortened wash cycle for lightly soiled washing.

SHORT: only possible with the programmes COTTONS, LINEN/ EASY CARES and EASY IRON

VERY SHORT: only possible with the programmes COTTONS, LIN- EN/EASY CARES, EASY IRON and DELICATES.

Delay Start

To delay the start of a programme by between 30 minutes and a max. of 20 hours.

Time Saving: SHORT or VERY SHORT

1.Press the TIME key repeated- ly, until the SHORT symbol flashes.

2.Press the OK key.

3.Press the TIME key. A black bar appears under the symbol, SHORT or VERY SHORT appears in the dis- play.

 

Time saving

12.45

 

NORMAL

14.37

 

 

 

 

aýýýýýaýaýaýaýaýaýaýKýT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TEMP.

 

RPM OPTIONS OK

TIME

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.To change from SHORT to VERY SHORT, press the TIME key again.

3You can change between NORMAL, SHORT, and VERY SHORT using the TIME key.

 

Time saving

12.45

 

VERY SHORT

14.12

 

 

 

 

aýýýýýaýaýaýaýaýaýaýKýT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TEMP.

 

RPM OPTIONS OK

TIME

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.Press the OK key to confirm

the selection. The display changes to the symbol for Delay Start, i.e. De- lay Start can now be set.

6.Press the TIME key, if no Delay Start is to be set. The display shows the SHORT symbol as well as the time for the end of the cycle.

18

Image 18
Contents Lavamat Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety information concerning installationChild safety SafetyPrior to using the appliance for the first time Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardWhat is shown in the display Cycle end atProgram overview Easy IronUse/Features Care Symbols1 R a c h e Prior to using for the first timeN g u a g e Programmende umCarrying out a wash programme prior to first use Setting the timePreparing and sorting washing Preparing washingRunning a wash cycle Adding detergent/conditionerWashing powder/tablets for the main wash cycle Switching on the appliance/selecting a program If you are using liquid detergentChanging spin speed/selecting rinse hold Speed or Rinse Hold is displayedWith spin speed 0 the TEMP. RPM Options OK Time Max . load Opening the door/Loading the washingCurrent load display goes out if the door is closed Setting options SensitivePrewashing SensitivePrewash, Sensitive, Stain, Night Cycle Time saving Setting timesDelay Start Time Saving Short or Very ShortStart Delay StartStart in 4h Starting a programmeInterrupting a programme/Adding washing WashingProgramme progress Interrupting a programmeMemory 1, 2 SetupWashing cycle complete/Removing the washing If Rinse Hold or Night Cycle was selectedSetting the Memory Memory Store programChanging the Memory N s e + VolumeU n d Extra RinseSet time LanguageClock Desired setting. With Contrast and brightnessEach press of the key or if Child safety device Deactivating the child safety deviceDetergent dispenser drawer Cleaning and maintenanceCleaning procedure Washing drumDoor and rubber collar Clean the glass in the door and the rubber collar regularlyWhat to do if Remedying small malfunctionsTap turned off Turn the tap on Foam can still be seen following the final rinse If the wash result is not satisfactoryThere are grey stains on the washing There are white residues on the washingWhen the water has all drained away Carrying out an emergency drainDrain pump Disposal Packaging materialOld appliance Technical data Consumption valuesSafety information concerning installation This washing machine cannot be built-inTransporting the appliance Installing the applianceWhen using a sack trolley to transport the washing machine Removing the transport lockWhere to install Remove both plastic caps sidewaysAppliance Making the appliance level If the appliance is to stand on a baseBrown Live Wire coloured green and yellow Electrical ConnectionPermanent Connection Connecting the appliance to the water supply Permitted water pressureWater inlet 35m long pressure hose is supplied with the applianceFrom your Service Force Centre Water DrainageFor drainage into an outlet Pumping heights of over 1 metre Guarantee/Customer Service Great BritainEuropean Guarantee LU4 9QQMagyarország +36 For general enquiries concerning 0870 5 929Customer Care Major Appliances105 176 Subject to change without notice